The A1-08 Wireless Temperature Data Logger is specifically designed to hook up to multiple thermistor inputs (6 total). This allows an increase in the number of sensors per pod and reduces the cost per measurement. This model also features two digital inputs and is designed to be connected to a wide range of digital sensors.

Package Contains:

• A1-08 Pod
• Pin-out Guide
• AC Adapter
• Standard Antenna
• Wall Mounting Bracket
• Batteries (3xAA)

Internal Sensors:

• Ambient Temperature

External Sensor Inputs:

• Thermistor (6)
• Digital Input (Contact Closure)(2)

The post Accsense A1-08 appeared first on CAS Dataloggers.

The Accsense A1-09 Wireless Voltage Data Logger is designed to hook up to multiple 0-5Vdc Analog inputs (6 total). This allows an increase in the number of sensors connected to each pod, and reduces the cost per measurement. This model also features two digital inputs and is designed to be connected to a wide range of digital sensors.

Package Contains:

• A1-09 Pod
• Pin-out Guide
• AC Adapter
• Standard Antenna
• Wall Mounting Bracket
• Batteries (3xAA)

Internal Sensors:

• Ambient Temperature

External Sensor Inputs:

• 0-5Vdc Analog Input (6)
• Digital Input (Contact Closure)(2)

The post Accsense A1-09 appeared first on CAS Dataloggers.

The A1-10 Wireless Current Data Logger is specifically designed to hook up to multiple 4-20mA inputs (6 total). This allows an increase in the number of sensors per pod, and reduces the cost per measurement. This model also features two digital inputs and is designed to be connected to a wide range of digital sensors.

Package Contains:

• A1-10 Pod
• Pin-out Guide
• AC Adapter
• Standard Antenna
• Wall Mounting Bracket
• Batteries (3xAA)

Internal Sensors:

• Ambient Temperature

External Sensor Inputs:

• 4-20mA Input (6)
• Digital Input (Contact Closure)(2)

The post Accsense A1-10 appeared first on CAS Dataloggers.

The A1-13 wireless temperature data logger is specifically designed to hook up to multiple RTD sensor inputs (3 total). This allows an increase in the number of sensors per pod and reduces the cost per measurement. This model also features two digital inputs and is designed to be connected to a wide range of digital sensors.

Package Contains:

• A1-13 Pod
• Pin-out Guide
• AC Adapter
• Standard Antenna
• Wall Mounting Bracket
• Batteries (3xAA)

Internal Sensors:

• Ambient Temperature

External Sensor Inputs:

• RTD Input (3)

Note: This pod requires the B1-06 Wireless Data Logger Gateway.

The post Accsense A1-13 appeared first on CAS Dataloggers.

The B1-06 Wireless Data Logger Gateway is the connection between your data and the internet. It supports up to 16 sensor pods. The B1-06 Wireless Gateway sends all of your data to either our secure servers or as a local ASCII stream which you can incorporate into your own custom software. Data stored online can be downloaded as a CSV file and loaded into most database applications. Additionally, our servers can send out phone, text or email alerts (with Premium Online Monitoring Subscription) to inform designated staff the moment that a reading falls out of range.

Accsense IT Requirements Overview

Accsense requires an RJ45 Ethernet connection with open internet access–that’s all!

By default, the Accsense B1-06 gateway is set to acquire its IP address dynamically from a DHCP server. Users can configure a static IP address using the Remote Gateway Configuration utility.

The communication from the gateway is only outbound; therefore the Accsense gateway does not require an external IP address or an opening in a corporate firewall. However, the Accsense gateway has no support for proxy servers and cannot act as a proxy client. In environments where proxy servers are used, the customer must set up a router to act as the proxy client for the Accsense gateway.

The communication between the Accsense gateway and the internet servers is done using the HTTPS protocol over port 443, the same as secure web traffic. The communication is encrypted using SSL, the same technology used for transmitting credit card information over the web.

The wireless communications employed by Accsense are 2.4GHz, but different frequencies and protocols from WiFi, thus it will not cause interference nor is it an opening for attackers to gain access to a corporate network. For more information see the Accsense Wireless Coexistence and Accsense Security documents.

The post Accsense B1-06 appeared first on CAS Dataloggers.

The Accsense A1-01a wireless environmental data logger is designed for general environmental measurements. It provides several different internal sensors, as well as a screw terminal connector for connecting to a wide range of external analog sensors. The pod also includes a +5Vdc output to power external sensors.

In the event no gateway can be reached, individual pods will store data until a connection is restored. The stored data will be transferred to the online account. Pods have a range of approx. 80m (250ft), and can also act as a repeater for other’s signals.

Package includes:

• A1-01 Pod
• Pin-out Guide
• AC Adapter
• Standard Antenna
• Wall Mounting Bracket
• Batteries (3xAA)

Internal sensors:

• Ambient Temperature
• Vibration
• Humidity
• Acoustic Level
• Ambient Light

External Sensor Inputs:

• 4-20mA Current Input with +20Vdc Loop
• Digital Input (Contact Closure)
• Counter
• 0-5Vdc Analog Input with +5Vdc Sensor Drive

The post Accsense A1-01a appeared first on CAS Dataloggers.

The Accsense A1-02b wireless temperature data logger is designed for measuring the temperature at a remote site. Right out of the box, it will measure the ambient temperature. Additionally, the screw terminal connector can be used for hooking up a high accuracy RTD or thermistor temperature sensor. A separate miniature TC connector allows the addition of a Type T thermocouple for cryogenic temperature measurements.
Package Contains:

• A1-02 Pod
• Pin-out Guide
• AC Adapter
• Standard Antenna
• Wall Mounting Bracket
• Batteries (3xAA)

Internal Sensors:

• Ambient Temperature

External Sensor Inputs:

• Type T Thermocouple
• 100ohm Platinum RTD
• Thermistor
• 0-5Vdc Analog Input

The post Accsense A1-02b appeared first on CAS Dataloggers.

The Accsense A1-05 wireless temperature humidity data logger measures the temperature and humidity at a given location. This pod can also be used as a “Repeater Pod” to extend the coverage or range of the network, or to add redundancy to a network operating in an area with high interference.

Package Contains:

• A1-05 Pod
• AC Adapter
• Standard Antenna
• Wall Mounting Bracket
• Batteries (3xAA)

Internal Sensors:

• Ambient Temperature
• Humidity

The post Accsense A1-05 appeared first on CAS Dataloggers.