Eltek Data Loggers and Telemetry Systems - CAS DataLoggers

Eltek Darca Heritage Software

Liz Zala — Fri, 15 Jun 2018 15:30:53 +0000

Darca Heritage software is a powerful site-based data acquisition, analysis and reporting software package for Eltek GenII wireless systems. Available in two versions for single or multiple receiver/loggers, it has been designed specifically for museum curators and conservators monitoring large installations. The software allows transmitters to be partitioned into zones and groups that reflect the physical layout of the measurement locations.

Sophisticated but simple-to-use, it provides powerful tools for:

Configuring and metering sensors
Changing logger settings
Updating site data automatically to a data file (version 1) or database (version 2)
Warning if any channel inputs are outside of safe limits
Sending alarms via email or text message
Metering data graphically on user-defined floor plans which show each group’s physical location
Analyzing data either graphically or statistically
Generating reports for the presentation of data

Darca Heritage has separate packages for administrators and users. The administrator can configure the software, set up the site site layout, configure logger and download data. The user can view downloaded data or current readings.

The post Eltek Darca Heritage Software appeared first on CAS Dataloggers.

Eltek Darca Plus Software

Liz Zala — Fri, 15 Jun 2018 15:28:53 +0000

Darca Plus Software provides easy to use but powerful tools for Squirrel data loggers and Gen II wireless systems to configure channels and settings, view real-time measurements, download stored data and analyze it either graphically or statistically. Connection to the data logger or receiver can be made by a direct serial link, USB to serial converter, LAN connection or through a cellular modem.

Key features of DARCA Plus:

All operational control of the Squirrel may be performed using the PC
Data can be exported into text format for analysis in a spreadsheet package
Squirrel channels may be scaled into appropriate engineering units
Alarm feature warns if any channel inputs are outside “‘safe” limits
Squirrel configuration may be saved as a Setup File and then applied to other Squirrels
Displays all selected channels on screen simultaneously
Contact Wizard guides you through the stages of contacting the Squirrel
“Shed” utility allows scheduled, automated downloading of data from the Squirrel
Transmitter setup for the Gen II Telemetry System
Powerful graphing tools display real-time or historical data: 3D plots, line, event and windrose
Plot color and axis configuration can be saved
Text comments can be added to points of interest on a graph
Summary window displays data and statistical information

The post Eltek Darca Plus Software appeared first on CAS Dataloggers.

Eltek GS-44

Liz Zala — Fri, 15 Jun 2018 14:39:11 +0000

The GS-44 Wireless Transmitter has 4 voltage/current inputs that can be configured to measure from 0-10V or 0-20 mA. It uses a 900 MHz wireless transmitter that provides communication range of up to 1000 meters in open air. The GS-44 is battery powered with a battery life of up to 4 years depending on transmission interval and environment.

The transmitter is compatible with all of the Eltek GenII receivers including the RX250AL receiver with alarm output, SC250 secure receiver, RC250 serial output receiver, WSR wireless sensor receiver and RP250GD wireless repeater. These systems utilize Elteks’ DARCA software for configuration, monitoring and data retrieval.

The post Eltek GS-44 appeared first on CAS Dataloggers.

Eltek RP250GD

Liz Zala — Wed, 06 Jun 2018 18:39:06 +0000

Contains high-performance receiver and transmitter compliant to EN 300-220.
LCD indicates on-air transmitter identity, status, and signal strength.
Extends the range of transmitters’ many times
Multiple repeaters can be used, enabling difficult sites to be covered easily.
Mains powered with built-in rechargeable batteries to provide up to 48 hours standby in the event of a mains failure.
Free standing or wall mountable.
Antenna socket permits use of external antenna to improve performance in difficult conditions.
PC software is used to configure the repeater, download transmitter activity data and specify transmitter authorization.

The post Eltek RP250GD appeared first on CAS Dataloggers.

Eltek SRV250

Liz Zala — Wed, 06 Jun 2018 18:38:36 +0000

The SRV250 Receiver logger is the enhanced version of the Eltek RX250 Receiver Logger that contains a built-in 3G cellular modem. The logger is compatible with all of the transmitters in the Eltek GenII family. It can connect with up to 125 transmitters and store data for up to 250 measurement channels. The SRV250 will continually upload data to a PC or cloud server like Amazon EC2 as long as a cellular connection is available. Data uploaded to the server can be accessed via standard Darca software or viewed over the internet in a web browser using the Eltek web viewer. In the event of a cellular interruption, internal memory can store a quarter million readings until the connection is restored. The SRV250 can send SMS text messages for alarms.

The logger has a built-in backup battery to prevent data logging from being interrupted even if there is a temporary AC power failure.

The post Eltek SRV250 appeared first on CAS Dataloggers.

Eltek RX250AL

Liz Zala — Tue, 05 Jun 2018 19:58:09 +0000

The RX250AL Receiver Logger is the heart of a GenII logging system. Because the RX250AL is responsible for receiving and storing the data, it is not necessary to have a PC permanently connected. The built-in battery means data logging is not interrupted even if there is a temporary AC power failure.

The RX250AL is compatible with all of the transmitters in the Eltek GenII family. It can connect with up to 125 transmitters and store data for up to 250 measurement channels. Standard internal memory can store almost a quarter million readings and can be expanded for up to 2 million readings.

The logger comes standard with 2 serial ports for connection to a PC or an optional cellular modem, USB or Ethernet converter.

The post Eltek RX250AL appeared first on CAS Dataloggers.

Eltek GD-52

Liz Zala — Fri, 04 May 2018 15:31:37 +0000

The GD-52 Wireless Temperature Transmitter has 4, 2 or 4 wire PT100 RTD inputs with a temperature measurement range of -100°C to +200°C. It uses a 900 MHz wireless transmitter that provides communication range of up to 1000 meters in open air. The GD-52 is battery powered with a battery life of up to 4 years depending on transmission interval and environment.

The GD-52 is compatible with all of the Eltek GenII receivers including the RX250AL receiver with alarm output, SC250 secure receiver, RC250 serial output receiver, WSR wireless sensor receiver and RP250GD wireless repeater. These systems utilize Eltek’s DARCA software for configuration, monitoring and data retrieval. This software is available in several different versions including DARCA Heritage for site-based monitoring and DARCA Secure designed to meet the requirements for FDA 21 CFR Part 11.

The post Eltek GD-52 appeared first on CAS Dataloggers.

Eltek GD-13E

Liz Zala — Fri, 04 May 2018 13:33:41 +0000

The GD-13E Wireless Temperature Humidity Transmitter has an external temperature and humidity sensor with a temperature measurement range of -40°C to +120°C and a humidity measurement range of 0% to 100 %. It uses a 900 MHz wireless transmitter that provides communication range of up to 1000 meters in open air. The GD-13E is battery powered with a battery life of up to 4 years depending on transmission interval and environment.

The GD-13E is compatible with all of the Eltek GenII receivers including the RX250AL receiver with alarm output, SC250 secure receiver, RC250 serial output receiver, WSR wireless sensor receiver and RP250GD wireless repeater. These systems utilize Eltek’s DARCA software for configuration, monitoring and data retrieval. This software is available in several different versions including DARCA Heritage for site-based monitoring and DARCA Secure designed to meet the requirements for FDA 21 CFR Part 11.

The post Eltek GD-13E appeared first on CAS Dataloggers.

Eltek GDM-52

Liz Zala — Wed, 02 May 2018 15:35:49 +0000

The GDM-52 Wireless Temperature Transmitter has 4, 2 or 4 wire PT100 RTD inputs with a temperature measurement range of -100°C to +200°C. Onboard memory allows for local storage of up to 12,000 readings in case of a wireless communication interruption. It uses a 900 MHz wireless transmitter that provides communication range of up to 1000 meters in open air. The GDM-52 is battery powered with a battery life of up to 4 years depending on transmission interval and environment.

The GDM-52 is compatible with all of the Eltek GenII receivers including the RX250AL receiver with alarm output, SC250 secure receiver, RC250 serial output receiver, WSR wireless sensor receiver and RP250GD wireless repeater. These systems utilize Eltek’s DARCA software for configuration, monitoring and data retrieval. This software is available in several different versions including DARCA Heritage for site-based monitoring and DARCA Secure designed to meet the requirements for FDA 21 CFR Part 11.

The post Eltek GDM-52 appeared first on CAS Dataloggers.

Eltek GD-24AL

Liz Zala — Thu, 26 Apr 2018 00:58:24 +0000

The GD-24AL Wireless Temperature Transmitter has sockets for 4 K or T type thermocouple inputs with a temperature measurement range of -200°C to +200°C. This unit provides a local audible and visual alarm indication. It uses a 900 MHz wireless transmitter that provides communication range of up to 1000 meters in open air. The GD-24AL is battery powered with a battery life of up to 4 years depending on transmission interval and environment.

The GD-24AL is compatible with all of the Eltek GenII receivers including the RX250AL receiver with alarm output, SC250 secure receiver, RC250 serial output receiver, WSR wireless sensor receiver and RP250GD wireless repeater. These systems utilize Elteks’ DARCA software for configuration, monitoring and data retrieval. This software is available in several different versions including DARCA Heritage for site-based monitoring and DARCA Secure designed to meet the requirements for FDA 21 CFR Part 11.

The post Eltek GD-24AL appeared first on CAS Dataloggers.