The Delphin ProfiMessage D Data Acquisition System is the next generation, Industry 4.0 modular data acquisition, monitoring, and control system. A master/slave design makes ProfiMessage D suitable for both small and large applications that require the processing of up to hundreds of channels. The ProfiMessage D incorporates a new OPC UA software interface which allows open data exchange to facilitate integration with other equipment and systems. It also features several other enhancements over the previous generation of ProfiMessage systems:

• Built-in display for monitoring and network configuration
• Two PROFIBUS interfaces (single or redundant)
• Optional WLAN interface
• Optional PROFINET interface

The ProfiMessage D has a modular master/slave design. Both the master and slave devices can accommodate two I/O modules. A single master can control up to 20 slaves allowing up to 660 I/O channels in a single system. There is a range of analog and digital I/O modules which allow the system to meet the requirements of all types of industrial DAQ applications. A network interface enables ProfiMessage devices to be integrated into a TCP network or to be directly connected to a PC workstation or laptop computer. Online measurement data can be transmitted, saved, and processed. The data can be stored simultaneously within the ProfiMessage D device itself.

Product Features

• Data acquisition and automation
• Data transmission via LAN (internet/intranet)
• Data storage capability for independent operation
• Modular and scalable
• Full potential isolation
• Universal inputs and outputs
• Control and automation functions
• Signal conditioning within the device
• Connection to external equipment and PLC control
• Configuration via PC

Universal Connectivity

ProfiMessage D’s universal inputs enable the connection of signals of any type including non-isolated signals. This means costly measurement transducers are usually not necessary. Potential isolation between channels as well as differential inputs saves both time and money.

Universal inputs enable any unit of measurement to be acquired (e.g. temperature, pressure flow, vibration, etc.). Data then undergoes direct scaling and linearization. Conversions from mA to bar or ml/min take place directly within the ProfiMessage D data acquisition system. High measurement precision is achieved through the use of 24-bit resolution Sigma-Delta converters and enables the connection of the smallest of signals (e.g. thermocouples).

Various Applications

• Multi-channel data acquisition
• Monitoring and alarm management
• Test stand automation
• Product testing
• Quality assurance
• Monitoring of buildings

Easy to configure

The configuration of the ProfiMessage D is done using a PC with the user-friendly DataService Configurator software. Configuration data is processed online and permanently within the devices. Optional integrated data memory up to 32 GB can locally store billions of measurement values.

The ProfiMessage D has an intelligent local controller which allows it to operate as a stand-alone device. This controller also provides many functions such as limits/alarms, calculations, logic, and other functions through software channels. This allows the system to be configured to meet the needs of many different types of applications without having to learn a complicated programming language.

Profisignal Software

The optional ProfiSignal software package is a Windows-based application available in three versions which provides a full range of capabilities from visualization and data archiving to fully automated test systems with report generation. Optional modules provide additional capabilities such as connecting to SQL databases, vibration analysis, or FDA CFR21 Part 11 compliance. The new ProfiSignal Web is a client/server application that allows platform-independent access to (remote) measurement projects from any standard web browser.

The post Delphin ProfiMessage D appeared first on CAS Dataloggers.

Versatile Measurement

The DT80W WiFi Universal Input Data Logger allows you to connect an array of sensors through versatile analog and digital channels, high-speed counter inputs, phase encoder inputs, and programmable serial sensor channels.

Temperature, voltage, current, 4-20mA loops, resistance, bridges, strain gauges, frequency, digital, serial, and calculated measurements can all be scaled, logged, and returned in engineering units or within statistical reporting.

Set up sampling, logging, alarm, and control tasks to suit your requirements while interfaces for smart sensors, GPS, and other intelligent devices expand the dataTaker DT80W flexibility.

Local Wireless Access

With wireless access, no need to have a physical connection to the logger. Send the program, view and download the data, or even modify your settings on a nearby PC or Tablet wirelessly either as a Master (Access Point mode) or Slave (Client).

Automatic Data Delivery

On Client mode, dataTaker can have access to a local router and if the router has internet access it can utilize the DT80W’s automatic data delivery features to schedule your data to be automatically emailed to your inbox every day, week, month, or other time interval.

More sophisticated systems can make use of the automatic data delivery features to send logged data to an FTP server.

The post dataTaker DT80W appeared first on CAS Dataloggers.

The Delphin ProfiMessage Data Acquisition System is a modular device for data acquisition and automation. A master/slave design makes ProfiMessage suitable for both small and large applications that require the processing of thousands of channels. Master and slave devices can each accommodate two I/O modules. There is a range of I/O modules for users to select an appropriate module(s) for their application. I/O modules are available for any number of channels and sensor types. A network interface enables ProfiMessage devices to be integrated into a TCP network or to be directly connected to a PC workstation or laptop computer. Online measurement data can be transmitted, saved and processed. The data can be stored simultaneously within the ProfiMessage device itself.

ProfiLab is identical in construction and functionality to ProfiMessage – only their housings differ. ProfiMessage devices are designed for rail-mounted installations, and ProfiLab, with its 4 mm plugs, for laboratory applications.

Product features

• Data acquisition and automation
• Data transmission via LAN (internet/intranet)
• Data storage capability for independent operation
• Modular and scalable
• Full potential isolation
• Universal inputs and outputs
• Control and automation functions
• Signal conditioning within the device
• Connection to external equipment and PLC control
• Configuration via PC

Universal Connectivity

ProfiMessage’s universal inputs enable the connection of signals of any type including non-isolated signals. This means costly measurement transducers are usually not necessary. Potential isolation between channels as well as differential inputs saves both time and money.

Universal inputs enable any unit of measurement to be acquired (e.g. temperature, pressure flow, vibration etc.). Data then undergoes direct scaling and linearization. Conversions from mA to bar or ml/min take place directly within the ProfiMessage data acquisition system. High measurement precision is achieved through the use of 24-bit resolution Sigma-Delta converters and enables the connection of the smallest of signals (e.g. thermocouples).

Various Applications

• Multi-channel data acquisition
• Monitoring and alarm management
• Test stand automation
• Product testing
• Quality assurance
• Monitoring of buildings

Easy to configure

An optional integrated data memory can permanently store up to 128 million measurement values without PC-support and with edge or level triggering. The ProfiSignal-Software enables online / offline analysis, visualization and operation from any PC workstation as well as PC-controlled process automation and database communications via ODBC/SQL.

The configuration of the Message devices takes place with the PC user-friendly DataService / Configurator software. Configuration data is processed online and permanently within the devices. Configuration data may be amended and adjusted during measurement runs.

Mobile Energy Measurement Case

These cases feature an integrated 3-phase power measuring unit for measuring the electrical power from motors, pumps, drives etc. Energy data from PLC or control systems can also be acquired via field bus interfaces such as PROFIBUS or ModBus. The energy measurement case is configured via LAN and can then function independently thanks to its integrated data memory capable of storing several million measurement values. The case can also be equipped with a UMTS modem to enable wireless operation for remote monitoring applications. Cases are now available.

The post Delphin ProfiMessage appeared first on CAS Dataloggers.

The post Delphin Expert Key 200 appeared first on CAS Dataloggers.

The Expert Logger 400 is Delphin‘s new generation of data loggers. It combines the latest communication technology with advanced measurement technology and is based on FPGA technology to make it especially powerful. It can process up to 16 analog input channels at both low and high rates of sampling. Measurement data can be accurately acquired, independently stored and transmitted to the internet or a PC for evaluation via USB, LAN, WLAN or LTE.

Operation Made Simple

Sensors are connected via plug-in screw terminals and a chart clearly shows how channels are arranged. Users always have a good overview of the channels despite their high density. Each set of four terminals can be configured as two differential inputs to measure voltage, currents, thermocouples, or to take measurements from a 4-wire RTD.

Configuration – Fast and Easy

The Expert Logger 400 is simple to configure from a PC. These settings remain stored within the Expert Logger even when disconnected from the power supply. The device settings can also be read out and stored on a PC and analyzed offline without the need for a connected Expert Logger. The offline configuration settings are then simply read into the device when connected. The software used for configuration is simple to operate to let users fully focus on their measurement tasks.

Intelligent Signal Processing

Signal processing using internal software channels significantly simplifies measurement tasks. Flexible calculation channels enable measurement data to undergo further computation and recording. Integrators directly calculate volumes or quantities from time-related measurement data such as mass and discharge flow rates. Limit values can monitor measurement data and be used to switch digital outputs or automatically send emails. Complex signal processing is possible using pulse counters, stop-clock functions, and operating-hours counter. Averages can be calculated and recorded as time-weighted or moving. The Expert Logger‘s software channels clearly set it apart from other loggers and make it very popular among users.

Applications

• Data logging
• Environmental measurement technology
• Product testing
• Measurement data diagnosis
• Lab data acquisition
• Trials and tests
• Energy optimization

The post Delphin Expert Logger 400 appeared first on CAS Dataloggers.

The Expert Logger 300 is Delphin‘s new generation of data loggers. It combines the latest communication technology with advanced measurement technology, and is based on FPGA technology to make it especially powerful. It can process up to 46 analog input channels at both low and high rates of sampling. Measurement data can be accurately acquired, independently stored and transmitted to the internet or a PC for evaluation via USB, LAN, WLAN or LTE.

Operation made simple

Sensors are connected via plug-in screw terminals and a chart clearly shows how channels are arranged. Users always have a good overview of the channels despite their high density. Each set of four terminals can be configured as two differential inputs to measure voltage, currents, thermocouples, or to take measurements from a 4-wire RTD.

Configuration – Fast and Easy

The Expert Logger 300 is simple to configure from a PC. These settings remain stored within the Expert Logger even when disconnected from the power supply. The device settings can also be read out and stored on a PC and analysed offline without the need for a connected Expert Logger. The offline configuration settings are then simply read into the device when connected. The software used for configuration is simple to operate to let users fully focus on their measurement tasks.

Intelligent Signal Processing

Signal processing using internal software channels significantly simplifies measurement tasks. Flexible calculation channels enable measurement data to undergo further computation and recording. Integrators directly calculate volumes or quantities from time related measurement data such as mass and discharge flow rates. Limit values can monitor measurement data and be used to switch digital outputs or automatically send emails. Complex signal processing is possible using pulse counters, stop-clock functions and operating-hours counter. Averages can be calculated and recorded as time-weighted or moving. The Expert Logger‘s software channels clearly set it apart from other loggers and make it very popular among users.

Applications

• Data logging
• Environmental measurement technology
• Product testing
• Measurement data diagnosis
• Lab data acquisition
• Trials and tests
• Energy optimization

The post Delphin Expert Logger 300 appeared first on CAS Dataloggers.

The Expert Logger 200 is Delphin‘s new generation of data loggers. It combines the latest communication technology with advanced measurement technology, and is based on FPGA technology to make it especially powerful. It can process up to 32 analog input channels at both low and high rates of sampling. Measurement data can be accurately acquired, independently stored and transmitted to the internet or a PC for evaluation via USB, LAN, WLAN or LTE.

Operation made simple

Sensors are connected via plug-in screw terminals and a chart clearly shows how channels are arranged. Users always have a good overview of the channels despite their high density. Each set of four terminals can be configured as two differential inputs to measure voltage, currents, thermocouples, or to take measurements from a 4-wire RTD.

Configuration – Fast and Easy

The Expert Logger is simple to configure from a PC. These settings remain stored within the Expert Logger even when disconnected from the power supply. The device settings can also be read out and stored on a PC and analysed offline without the need for a connected Expert Logger. The offline configuration settings are then simply read into the device when connected. The software used for configuration is simple to operate to let users fully focus on their measurement tasks.

Intelligent Signal Processing

Signal processing using internal software channels significantly simplifies measurement tasks. Flexible calculation channels enable measurement data to undergo further computation and recording. Integrators directly calculate volumes or quantities from time related measurement data such as mass and discharge flow rates. Limit values can monitor measurement data and be used to switch digital outputs or automatically send emails. Complex signal processing is possible using pulse counters, stop-clock functions and operating-hours counter. Averages can be calculated and recorded as time-weighted or moving. The Expert Logger‘s software channels clearly set it apart from other loggers and make it very popular among users.

Applications

• Data logging
• Environmental measurement technology
• Product testing
• Measurement data diagnosis
• Lab data acquisition
• Trials and tests
• Energy optimization

The post Delphin Expert Logger 200 appeared first on CAS Dataloggers.

The Expert Logger 100 is among Delphin‘s new generation of data loggers. It combines the latest communication technology with advanced measurement technology and is based on FPGA technology to make it especially powerful. It can process up to 16 analog input channels at both low and high rates of sampling. Measurement data can be accurately acquired, independently stored and transmitted to the internet or a PC for evaluation via USB, LAN, WLAN or LTE.

Operation made simple

Sensors are connected via plug-in screw terminals and a chart clearly shows how channels are arranged. Users always have a good overview of the channels despite their high density. Each set of four terminals can be configured as two differential inputs to measure voltage, currents, thermocouples, or to take measurements from a 4-wire RTD.

Configuration – Fast and Easy

The Expert Logger is simple to configure from a PC. These settings remain stored within the Expert Logger even when disconnected from the power supply. The device settings can also be read out and stored on a PC and analyzed offline without the need for a connected Expert Logger. The offline configuration settings are then simply read into the device when connected. The software used for configuration is simple to operate to let users fully focus on their measurement tasks.

Intelligent Signal Processing

Signal processing using internal software channels significantly simplifies measurement tasks. Flexible calculation channels enable measurement data to undergo further computation and recording. Integrators directly calculate volumes or quantities from time-related measurement data such as mass and discharge flow rates. Limit values can monitor measurement data and be used to switch digital outputs or automatically send emails. Complex signal processing is possible using pulse counters, stop-clock functions, and operating-hours counter. Averages can be calculated and recorded as time-weighted or moving. The Expert Logger‘s software channels clearly set it apart from other loggers and make it very popular among users.

Applications

• Data logging
• Environmental measurement technology
• Product testing
• Measurement data diagnosis
• Lab data acquisition
• Trials and tests
• Energy optimization

The post Expert Logger 100 appeared first on CAS Dataloggers.

Delphin LogMessage LM5000 Data Logger devices are specifically designed as universal data loggers.

Product Highlights

• Reliable data logger including potential isolation
• 16 Universal analog inputs for thermocouples, RTDs, mV or mA signals
• High-precision differential inputs with up to 24-bit resolution
• Galvanic isolation, isolation voltages of up to 650 V
• Storage capacity of up to 1 billion measurement values (standard = 250 million)
• Measurement data portrayed as trends and exportable in ASCII format
• Excellent return on investment
• LAN interface for configuration and data transfer
• Serial interfaces, Modbus RTU and TCP/IP
• A range of internal calculation and logic channels
• Monitoring and alarm functions

The LogMessage LM5000 works completely independently as a data logger for acquiring, monitoring, computing and storing measurement data. The internal data memory allows continuous recording of up to 250 million samples. LogMessage is available in nine different styles.

ProfiSignal Go is the basic software, used for online/offline monitoring and measurement data analysis. Just three steps are required to display measurement data as trends, to analyze the data, and to evaluate offline data.

Other software is available for all types of applications:

• ProfiSignal Go: Software for data acquisition
• ProfiSignal Basic: software for process visualization and monitoring
• ProfiSignal Klicks: software for the automation of process and measurement procedures

Systems are delivered to match user requirements: e.g. long-term monitoring, machine monitoring, or remote monitoring.

Examples of LogMessage

• Data Logger for fault diagnostics
• Energy efficiency measurements
• Experiments and product testing
• Remote data transfer via GSM / UMTS
• Testing and test stand automation
• Service data recording and fault detection
• GPS Logging

Included in Delivery of a LogMessage logger:

• LogMessage Device
• Drivers for LabView ™ and DASYLab ™
• Modbus TCP and OPC Server Interface
• OCX driver to enable self-programming

The post Delphin LogMessage LM5000 appeared first on CAS Dataloggers.

The post Delphin Expert Key 100 appeared first on CAS Dataloggers.