The PR1000Ex is an intrinsically safe pressure and temperature data logger used to accurately monitor and record at user programmable reading intervals. It carries hazardous location, intrinsically safe certification in accordance with the latest issue of IECEx 60079-0, IECEx 60079-11 and Directive 2014/34/EU (known as ATEX). The rugged stainless steel design allows for the device to be placed in harsh environments, which makes it well suited for use with air conditioning systems, chilled water, hot water, air, gas, oil and steam pressure systems.

The PR1000Ex can also monitor and record transient pressure through software configuration of user defined trigger thresholds and time periods. The logger can be configured to record measurements at rates as fast as 128Hz or as slow as once every 24 hours. The non-volatile memory has a capacity of over 2 million readings.

The PR1000Ex uses a stainless steel pressure strain gauge to accurately measure the pressure. The 1/4 inch NPT pressure port featured on the device allows for compatibility with a variety of fittings and adapters. The internal temperature sensor provides ambient temperature measurements. The PR1000Ex is also fully submersible. There are many different pressure ranges available to fit most any application.

Features

• Rugged
• Reusable
• Submersible
• Programmable start time
• Real-time operation
• User-friendly
• Low cost
• CE compliant

Certified Intrinsically Safe

• Electrical Protection Concepts: IEC: 60079-11 Ex ia – Ex ic, Intrinsic Safety Zones 0-2
• Equipment Protection Level: Ga – Gc, Zones 0-2
• Gas Groups: IIC P Statistics Export to Excel Tabular Data View
• Temperature Class: T4

PR1000Ex Applications

• Pneumatics
• Process control systems
• Gas compressors
• Natural gas production
• Lubrication systems
• Chemical processing
• Pulp and paper processing
• Medical instrumentation
• Environmental studies
• Waste water treatment
• HVAC
• Oil & gas industries
• EtO Sterilization

The post PR1000Ex appeared first on CAS Dataloggers.

The PR1000IS is an intrinsically safe pressure and temperature data logger used to accurately monitor and record at user programmable reading intervals. It carries hazardous location, intrinsically safe certification in accordance with the latest issue of FM3600, FM3610. The rugged stainless steel design allows for the device to be placed in harsh environments, which makes it well suited for use with air conditioning systems, chilled water, hot water, air, gas, oil and steam pressure systems.

The PR1000IS can also monitor and record transient pressure through software configuration of user defined trigger thresholds and time periods. The logger can be configured to record measurements at rates as fast as 128Hz or as slow as once every 24 hours. The non-volatile memory has a capacity of over 2 million readings.

The PR1000IS uses a stainless steel pressure strain gauge to accurately measure the pressure. The 1/4 inch NPT pressure port featured on the device allows for compatibility with a variety of fittings and adapters. The internal temperature sensor provides ambient temperature measurements. The PR1000IS is also fully submersible. There are many different pressure ranges available to fit most any application.

Features

• Rugged
• Reusable
• Submersible
• Programmable start time
• Real-time operation
• User-friendly
• Low cost
• CE compliant

Certified Intrinsically Safe

• Class I, II, III, Division 1, Groups A-G,-40 °C < Tamb < +80 °C, T4A
• Class I, II, III, Division 2, Groups A-D, F, G, -40 °C < Tamb < +80 °C, T4A
• Temperature Class: T4A
• CAN/CSA-C22.2 No. 60079-0:15 P Statistics Export to Excel Tabular Data View
• CAN/CSA-C22.2 No. 60079-11:14

PR1000IS Applications

• Pneumatics
• Process control systems
• Gas compressors
• Natural gas production
• Lubrication systems
• Chemical processing
• Pulp and paper processing
• Medical instrumentation
• Environmental studies
• Waste water treatment
• HVAC
• Oil & gas industries

The post PR1000IS appeared first on CAS Dataloggers.

The RTR-505B-Pt is a data logger with an included RTD module that offers a temperature measurement range of -199℃ to 600℃. Compatible RTD sensors include Pt100 (3-wire/4-wire) and Pt1000 (3-wire/4-wire).

The brand new RTR-500B series allows you to mix and match an array of wireless radio communication loggers with various Base Units or Data Collectors to meet your needs. Logged data can be automatically sent via network or mobile communication to be saved in cloud storage or to a specified location. This new generation adds BlueTooth 4.2 Low Energy communication as well as improved security.

RTR-505B-Pt data loggers have a wireless radio communication range with compatible base units of up to 150m (500ft).

Data can be transmitted from a logger to a base unit and then automatically uploaded to cloud storage or saved to a specified location. Data can also be checked on your PC screen or on-site with one of our compatible data collectors. Data can be monitored in real-time and warning information can be viewed both on-site and from the cloud.

Looking for the RTR-505 versions? The RTR-500 Series has been effectively discontinued, however, existing RTR-500 Series hardware will work with the new RTR-500B Series.

Introduction to the RTR-500B Series

The post TandD RTR-505B-Pt appeared first on CAS Dataloggers.

The RTR-505B-TC is a data logger with an included thermocouple module that offers a temperature measurement range of -50℃ to 1760℃. Compatible thermocouple sensors include Type K, J, T, and S.

The brand new RTR-500B series allows you to mix and match an array of wireless radio communication loggers with various Base Units or Data Collectors to meet your needs. Logged data can be automatically sent via network or mobile communication to be saved in cloud storage or to a specified location. This new generation adds BlueTooth 4.2 Low Energy communication as well as improved security.

RTR-505B-TC data loggers have a wireless radio communication range with compatible base units of up to 150m (500ft).

Data can be transmitted from a logger to a base unit and then automatically uploaded to cloud storage or saved to a specified location. Data can also be checked on your PC screen or on-site with one of our compatible data collectors. Data can be monitored in real-time and warning information can be viewed both on-site and from the cloud.

Looking for the RTR-505 versions? The RTR-500 Series has been effectively discontinued, however, existing RTR-500 Series hardware will work with the new RTR-500B Series.

Introduction to the RTR-500B Series

The post TandD RTR-505B-TC appeared first on CAS Dataloggers.

The RTR-502B is a temperature data logger with an external sensor and quick response to changes in temperature. It has a large selection of optional sensors with a wide measurement range (-60℃ to +155℃), which provides extra versatility to match your situation. It also has a waterproof rating of IP64 (splash-proof).

The brand new RTR-500B series allows you to mix and match an array of wireless radio communication loggers with various Base Units or Data Collectors to meet your needs. Logged data can be automatically sent via network or mobile communication to be saved in cloud storage or to a specified location.

RTR-502B data loggers have a wireless radio communication range with compatible base units of up to 150m (500ft).

Data can be transmitted from a logger to a base unit and then automatically uploaded to cloud storage or saved to a specified location. Data can also be checked on your PC screen or on-site with one of our compatible data collectors.

The RTR-502B is comparatively quick to follow changes in temperature and can be used with a wide variety of sensors, making it suitable for use in logging product temperature of both liquids and solids. It is also well suited for measuring ambient temperatures inside refrigeration and freezer units.

Looking for the RTR-502? The RTR-500 Series has been effectively discontinued, however, existing RTR-500 Series hardware will work with the new RTR-500B Series.

Introduction to the RTR-502B Series

The post TandD RTR-502B appeared first on CAS Dataloggers.

The RTR-501B with its compact rugged design and internal temperature sensor can be used in environments of -40℃ to +80℃ and has an IP67 waterproof rating (immersion proof). The slower response to temperature changes makes it perfect for temperature monitoring of products stored in the refrigerator.

The brand new RTR-500B series allows you to mix and match an array of wireless radio communication loggers with various Base Units or Data Collectors to meet your needs. Logged data can be automatically sent via network or mobile communication to be saved in cloud storage or to a specified location.

RTR-501B data loggers have a wireless radio communication range with compatible base units of up to 150m (500ft).

Data can be transmitted from a logger to a base unit and then automatically uploaded to cloud storage or saved to a specified location. Data can also be checked on your PC screen or on-site with one of our compatible data collectors.

Its strong and compact design makes it perfect for temperature management during transportation of not only food items, but also, pharmaceuticals and precision equipment.

Looking for the RTR-501? The RTR-500 Series has been effectively discontinued, however, existing RTR-500 Series hardware will work with the new RTR-500B Series.

Introduction to the RTR-500B Series

The post TandD RTR-501B appeared first on CAS Dataloggers.

Versatile Measurement

The DT80W WiFi Universal Input Data Logger allows you to connect an array of sensors through versatile analog and digital channels, high-speed counter inputs, phase encoder inputs, and programmable serial sensor channels.

Temperature, voltage, current, 4-20mA loops, resistance, bridges, strain gauges, frequency, digital, serial, and calculated measurements can all be scaled, logged, and returned in engineering units or within statistical reporting.

Set up sampling, logging, alarm, and control tasks to suit your requirements while interfaces for smart sensors, GPS, and other intelligent devices expand the dataTaker DT80W flexibility.

Local Wireless Access

With wireless access, no need to have a physical connection to the logger. Send the program, view and download the data, or even modify your settings on a nearby PC or Tablet wirelessly either as a Master (Access Point mode) or Slave (Client).

Automatic Data Delivery

On Client mode, dataTaker can have access to a local router and if the router has internet access it can utilize the DT80W’s automatic data delivery features to schedule your data to be automatically emailed to your inbox every day, week, month, or other time interval.

More sophisticated systems can make use of the automatic data delivery features to send logged data to an FTP server.

The post dataTaker DT80W appeared first on CAS Dataloggers.

The new DT82I Industrial Data Logger Series 4 version has increased sampling speed, measurement range, and programmable analog output.

The DT82I smart data logger provides an extensive array of features that allow it to be used across various applications. The DT82I is a robust, stand-alone, low-power data logger featuring USB memory stick support, 18-bit resolution, extensive communications capabilities, and a built-in display.

The dataTaker DT82I’s Dual Channel concept allows up to 4 isolated or 6 commonly referenced analog inputs to be used in many combinations. With support for Modbus for SCADA systems, FTP and Web interface, and 12V regulated output to power sensors, the DT82I is a self-contained solution.

Versatile Measurement

Connect an array of sensors through versatile analog and digital channels, high-speed counter inputs, and programmable serial sensor channels.

Temperature, voltage, current, 4-20mA loops, resistance, bridges, strain gauges, frequency, digital, serial, and calculated measurements can all be scaled, logged, and returned in engineering units or within statistical reporting.

Set up sampling, logging, alarm, and control tasks to suit your requirements while interfaces for smart sensors, GPS, and other intelligent devices expand the DT82I flexibility.

Easy Data Management & Communication

With the standard unit able to store up to 10 million data points (expandable) you can log as much or as little as you need. Overwrite or stop logging once allocated memory is full, archive data on alarm event, copy to USB memory or transfer via FTP/ Email, the choice is yours.

Communications features include RS232 and Ethernet, and connect to the DT82I locally, remotely through a modem, or over the Internet.

The post dataTaker DT82I appeared first on CAS Dataloggers.

The new DT85 Universal Input Data Logger Series 4 version has increased sampling speed, measurement range and programmable analog output.

The dataTaker DT85 smart data logger provides an extensive array of features that allow it to be used across a wide variety of applications. The DT85 is a robust, standalone, low power data logger featuring USB memory stick support, 18-bit resolution, extensive communications capabilities and built-in display.

The dataTaker DT85’s Dual Channel concept allows up to 32 isolated or 48 common referenced analog inputs to be used in many combinations. With support for multiple SDI-12 sensor networks, Modbus for SCADA systems, FTP and Web interface, 12V regulated output to power sensors, the DT85 is a totally self-contained solution.

Versatile Measurement

Connect an array of sensors through the versatile analog and digital channels, high-speed counter inputs, phase encoder inputs and programmable serial sensor channels.

Temperature, voltage, current, 4-20mA loops, resistance, bridges, strain gauges, frequency, digital, serial and calculated measurements can all be scaled, logged and returned in engineering units or within statistical reporting.

Set up sampling, logging, alarm and control tasks to suit your own requirements while interfaces for smart sensors, GPS, and other intelligent devices expand the DT85 flexibility.

Superior Data Storage and Communications

With the standard unit able to store up to 10 million data points (expandable) you can log as much or as little as you need. Overwrite or stop logging once allocated memory is full, archive data on alarm event, copy to USB memory or transfer via FTP/ Email, the choice is yours.

Communications features include RS232, USB, and Ethernet, connect to the DT85 locally, remotely through a modem or over the Internet.

Read more about the DT85 Universal Input Data Logger in this apps note about monitoring a solar energy system.

The post dataTaker DT85 appeared first on CAS Dataloggers.

The new Series 4 version of the DT80 Universal Input Data Logger has increased sampling speed, measurement range, and programmable analog output.

The dataTaker DT80 Universal Input Data Logger provides an extensive array of features that allow it to be used across various applications. The DT80 is a robust, stand-alone, low-power data logger featuring USB memory stick support, 18-bit resolution, extensive communications capabilities, and a built-in display.

The dataTaker DT80’s Dual Channel concept allows up to 10 isolated or 15 commonly referenced analog inputs to be used in many combinations. With support for multiple SDI-12 sensor networks, Modbus for SCADA systems, FTP and Web interface, and 12V regulated output to power sensors, the DT80 is a self-contained solution.

Versatile Measurement

Connect an array of sensors through versatile analog and digital channels, high-speed counter inputs, phase encoder inputs, and programmable serial sensor channels.

Temperature, voltage, current, 4-20mA loops, resistance, bridges, strain gauges, frequency, digital, serial, and calculated measurements can all be scaled, logged, and returned in engineering units or within statistical reporting.

Set up sampling, logging, alarm, and control tasks to suit your requirements while interfaces for smart sensors, GPS, and other intelligent devices expand the DT80 flexibility.

Superior Data Storage and Communications

With the standard unit able to store up to 10 million data points (expandable) you can log as much or as little as you need. Overwrite or stop logging once allocated memory is full, archive data on alarm event, copy to USB memory or transfer via FTP/ Email, the choice is yours.

Communications features include RS232, USB, and Ethernet, and connect to the DT80 locally, remotely through a modem, or over the Internet.

FTP/ Email provides data to your office over the internet or wireless network, without the need for polling or specific host software.

Read how the DT80 universal input data logger was used for Nitriding Process Temperature Trending in Industrial Heating Magazine.

Read More About the DT80 Intelligent Universal Input Data Logger:

Connecting a dataTaker DT80-Range Data Logger to a LAN

Power Metering with a DT80 Using WattNode Transducers

The World’s Fastest DT80

The post dataTaker DT80 appeared first on CAS Dataloggers.