The OdaLog® G20N is the next generation of the industry-leading OdaLog family, now with a digital smart sensor, enabling predictive maintenance and a long in-field deployment of up to 90 days. OdaLog G20N is rated to IP68, ATEX/IECEx certified, and with Bluetooth, USB, and Modbus built in, data access is easy – manually or via an integrated system.

Typical Gas Monitoring Areas:

• Sewer collection lines
• Water treatment plants
• Volcanoes
• Manholes
• Chemical Plants
• Drain and pits
• Storage and Warehouses

You can learn more about the dangers of exposure to Hydrogen Sulfide gas here.

The post OdaLog G20N appeared first on CAS Dataloggers.

The OdaLog® G20 is the next generation of the industry-leading OdaLog family, now with a digital smart sensor, enabling predictive maintenance and a long in-field deployment of up to 90 days. OdaLog G20 is rated to IP68, ATEX/IECEx certified, and with Bluetooth, USB, and Modbus built in, data access is easy – manually or via an integrated system.

Typical Gas Monitoring Areas:

• Sewer collection lines
• Water treatment plants
• Volcanoes
• Manholes
• Chemical Plants
• Drain and pits
• Storage and Warehouses

You can learn more about the dangers of exposure to Hydrogen Sulfide gas here.

The post OdaLog G20 appeared first on CAS Dataloggers.

View the Quick User Guide for the DryDock here.

The post OdaLog DryDock appeared first on CAS Dataloggers.

OdaTrak Key Features:

• Easy to transmit data incorporates a 4-20mA adapter to transmit gas data using a fiber optic cable
• Real-time data readily available when connected to a PLC or SCADA system
• Specifically designed for harsh wastewater environments: unique adapter fully sealed, proven & robust design
• Quick & easy installation: standard M20 electrical thread, special machined housing for easy mounting of the OdaTrak fiber optic cable
• Programmed fault detection: OdaTrak detects loss of data from the OdaLog, will output a fault signal on the 4-20mA line alerting the user to a fault condition
• Special fiber optic cable: safe to use in most commonly found hazardous environments.
• Two models of cables are available, both with stainless steel connectors;
  1. standard coating for the fiber optic cable
  2. extra protective sheath added over the cable for harsher wastewater environments.

How It Works:

Data sent from the OdaLog L2 logger equipped with a fiber optic interface over a fiber optic cable which is then read by the OdaTrak adapter. It then provides a corresponding signal on a 4-20mA loop which is powered externally.

The system enables the OdaLog L2 to be interfaced with telemetry and control systems to provide the user with real-time gas data.

In normal operation, the OdaTrak System requires two long-term OdaLog loggers so that they can be rotated in service with each logger in service no longer than four weeks, while the other OdaLog logger is allowed to recover either in fresh air or via the dry-dock.

The OdaTrak System is not intrinsically safe.

Typical OdaTrak Applications:

• Water Authorities
• Odor Control Companies
• Chemical Vendors
• Water Treatment Plant Municipalities
• Existing OdaLog L2 Users

View more OdaLog Accessories here.

The post OdaLog OdaTrak 4-20mA Adapter appeared first on CAS Dataloggers.

RTx Wireless H2S Gas Logger Features:

• Instrument Temp Range: -20°C (-4°F) to 50°C (122°F)
• Sensor Temp Range: -10°C to +40°C (14°F to 104°F)
• Ingress Protection: IP66/68
• External Dimensions: 3″ Diameter x 10.24″ Tall [without antenna]
• Weight:  34.5oz [with default battery type fitted]
• Power Supply: 2 Replaceable D-Size 3.6 V Lithium Batteries
• Battery Life/Run Time: Greater than 12 months (*depending on the signal strength and server transmission interval)
• Data Logging Capacity: Up to 42,000 readings in total (local memory, unlimited server memory)
• Sample Interval: Selectable from 1 second to 1 hour
• Communication Module: Internal Quad-band modem (850-900/1800/1900MHz)
• Tri-Band Waterproof Antenna: 7.5″ High

Three different detection ranges are available:

0-50 PPM

0-200 PPM

0-1000 PPM

Typical Applications:

• Chemical vendors
• Wastewater treatment plants
• Odor control consultants
• Municipalities

We also have two standard OdaLog H2S loggers with a Standard Sensor and Long-Term Sensor plus models for other gases including ammonia, chlorine, sulfur dioxide, NO, NO2, carbon monoxide, and hydrogen cyanide.

You can learn more about the dangers behind the exposure to Hydrogen Sulfide gas here.

The post OdaLog RTx Wireless H2S Gas Logger appeared first on CAS Dataloggers.

OdaLog L2 H2S Gas Logger – LL Features:

• Instrument Operating Range: -20°C (-4°F) to 50°C (122°F)
• Sensor Operating Range: -10°C to +40°C (14°F to 104°F)
• IP66/68 Ingress Protection
• Dimensions: 2.44” Diameter x 7.72” Tall
• Weight: 14.8 oz
• Power Supply: Replaceable C-Size Lithium Battery
• Battery Life/Run Time: Greater than 8 months
• Data Logging Capacity: Up to 42,000 readings
• Sample Interval: Selectable from 1 second to 1 hour

Two different detection ranges are available:

0-200 PPM

0-1000 PPM

Typical Applications:

• Gas monitoring in manholes, drains, and pits
• Odor monitoring in sewer and streaming water
• Ventilation pipes and rising mains
• Inside sewer collection lines
• Selected areas in treatment plants
• Asset management and odor control

The L2 H2S Gas Logger – LL is also available with a Standard sensor, suitable for short-term deployment plus models for other gases including ammonia, chlorine, sulfur dioxide, NO, NO2, carbon monoxide, and hydrogen cyanide.

You can learn more about the dangers behind exposure to Hydrogen Sulfide gas here.

The post OdaLog L2 H2S Gas Logger – LL appeared first on CAS Dataloggers.

OdaLog L2 H2S Data Logger Features:

• Instrument Operating Range: -20°C (-4°F) to 50°C (122°F)
• Sensor Operating Range: -10°C to +40°C (14°F to 104°F)
• IP66/68 Ingress Protection
• Dimensions: 2.44” Diameter x 7.72” Tall
• Weight: 14.8 oz
• Power Supply: Replaceable C-Size Lithium Battery
• Battery Life/Run Time: Greater than 8 months
• Data Logging Capacity: Up to 42,000 readings
• Sample Interval: Selectable from 1 second to 1 hour

Four different detection ranges are available:

0-50 PPM

0-200 PPM

0-1000 PPM

0-2000 PPM

Typical Applications:

• Gas monitoring in manholes, drains, and pits
• Odor monitoring in sewer and streaming water
• Ventilation pipes and rising mains
• Inside sewer collection lines
• Selected areas in treatment plants
• Asset management and odor control

The L2 H2S Data Logger is also available with a Long Term sensor, which allows for longer deployment times (up to thirty days at a time) plus models for other gases including ammonia, chlorine, sulfur dioxide, NO, NO2, carbon monoxide, and hydrogen cyanide.

You can learn more about the dangers behind exposure to Hydrogen Sulfide gas here.

The post OdaLog L2 H2S Data Logger – SL appeared first on CAS Dataloggers.