The MSR175Pro has been specifically developed for transport applications involving high masses and short-duration, highly dynamic shock events. The integrated 3-axis acceleration sensor with selectable measuring ranges of ±10 g, ±20 g, and ±40 g reliably records both low-frequency transport loads and short-duration shock events. Selectable sampling rates from 4 Hz to 4000 Hz, combined with anti-aliasing, decimation, and high-pass filters, enable clean separation of relevant shock signal components from static acceleration influences. This allows transport-induced loads to be technically assessed correctly and misinterpretations caused by gravitational acceleration or vehicle motion to be avoided.

Tamper-proof event recording and reliable data

The event-based data storage with shock thresholds selectable in defined increments from 0.5 g and a separate auxiliary memory that can not be overwritten ensures that critical transport loads are recorded completely and tamper-proof. The recorded time histories and directional information allow precise reconstruction of the load situation and provide a reliable data basis for damage analysis, acceptance procedures, and the technical clarification of liability and insurance matters.

Software package included in delivery

The MSR175 software package supports all data loggers of the MSR175 product family, including the MSR175Pro, and is used for configuration, evaluation, and documentation of the recorded measurement data. It enables efficient processing of large data volumes and traceable analysis of transport-relevant events.

The post MSR175Pro appeared first on CAS Dataloggers.

The PR1000Ex is an intrinsically safe pressure and temperature data logger used to accurately monitor and record at user programmable reading intervals. It carries hazardous location, intrinsically safe certification in accordance with the latest issue of IECEx 60079-0, IECEx 60079-11 and Directive 2014/34/EU (known as ATEX). The rugged stainless steel design allows for the device to be placed in harsh environments, which makes it well suited for use with air conditioning systems, chilled water, hot water, air, gas, oil and steam pressure systems.

The PR1000Ex can also monitor and record transient pressure through software configuration of user defined trigger thresholds and time periods. The logger can be configured to record measurements at rates as fast as 128Hz or as slow as once every 24 hours. The non-volatile memory has a capacity of over 2 million readings.

The PR1000Ex uses a stainless steel pressure strain gauge to accurately measure the pressure. The 1/4 inch NPT pressure port featured on the device allows for compatibility with a variety of fittings and adapters. The internal temperature sensor provides ambient temperature measurements. The PR1000Ex is also fully submersible. There are many different pressure ranges available to fit most any application.

Features

• Rugged
• Reusable
• Submersible
• Programmable start time
• Real-time operation
• User-friendly
• Low cost
• CE compliant

Certified Intrinsically Safe

• Electrical Protection Concepts: IEC: 60079-11 Ex ia – Ex ic, Intrinsic Safety Zones 0-2
• Equipment Protection Level: Ga – Gc, Zones 0-2
• Gas Groups: IIC P Statistics Export to Excel Tabular Data View
• Temperature Class: T4

PR1000Ex Applications

• Pneumatics
• Process control systems
• Gas compressors
• Natural gas production
• Lubrication systems
• Chemical processing
• Pulp and paper processing
• Medical instrumentation
• Environmental studies
• Waste water treatment
• HVAC
• Oil & gas industries
• EtO Sterilization

The post PR1000Ex appeared first on CAS Dataloggers.

The PR1000IS is an intrinsically safe pressure and temperature data logger used to accurately monitor and record at user programmable reading intervals. It carries hazardous location, intrinsically safe certification in accordance with the latest issue of FM3600, FM3610. The rugged stainless steel design allows for the device to be placed in harsh environments, which makes it well suited for use with air conditioning systems, chilled water, hot water, air, gas, oil and steam pressure systems.

The PR1000IS can also monitor and record transient pressure through software configuration of user defined trigger thresholds and time periods. The logger can be configured to record measurements at rates as fast as 128Hz or as slow as once every 24 hours. The non-volatile memory has a capacity of over 2 million readings.

The PR1000IS uses a stainless steel pressure strain gauge to accurately measure the pressure. The 1/4 inch NPT pressure port featured on the device allows for compatibility with a variety of fittings and adapters. The internal temperature sensor provides ambient temperature measurements. The PR1000IS is also fully submersible. There are many different pressure ranges available to fit most any application.

Features

• Rugged
• Reusable
• Submersible
• Programmable start time
• Real-time operation
• User-friendly
• Low cost
• CE compliant

Certified Intrinsically Safe

• Class I, II, III, Division 1, Groups A-G,-40 °C < Tamb < +80 °C, T4A
• Class I, II, III, Division 2, Groups A-D, F, G, -40 °C < Tamb < +80 °C, T4A
• Temperature Class: T4A
• CAN/CSA-C22.2 No. 60079-0:15 P Statistics Export to Excel Tabular Data View
• CAN/CSA-C22.2 No. 60079-11:14

PR1000IS Applications

• Pneumatics
• Process control systems
• Gas compressors
• Natural gas production
• Lubrication systems
• Chemical processing
• Pulp and paper processing
• Medical instrumentation
• Environmental studies
• Waste water treatment
• HVAC
• Oil & gas industries

The post PR1000IS appeared first on CAS Dataloggers.

The PR2000 is a battery powered pressure data logger, with an LCD display. It is perfect for applications requiring display pressure readings and a logger.

The 8-button keypad and large LCD provide convenient access to current data and recorder setup. Additionally, memory and battery levels, external power status, and sampling and recording status are shown on the LCD.

Available on-screen data includes: statistics (min, max, average); recording status (start, stop and recording rate); display options (units, text size); and calibration information (date calibrated, date for recalibration). Statistics can be cleared at any time during logging.

With 262,144 readings, the PR2000 has one of the largest memory capacities of any similar data recorder on the market. The non-volatile memory will retain recorded data, even if battery power is lost.

A calibration certificate is available for users needing to meet regulatory requirements. Creating permanent records, performing data calculations, and the graphing of data is quick and easy: Simply connect the interface cable to an available USB port and, with a few clicks of the mouse, data is downloaded and ready for review or export to Excel®.

Features

• Large, backlit LCD display
• Front keypad with lock feature
• Standard 1/4 inch NPT fitting
• High speed download
• Real-time operation
• User-selectable measurement units
• Min./max. and average statistics
• Programmable start/stop time
• Convenient status indicators
• User replaceable batteries

Applications

• Precision Pressure Recording
• HVAC
• Medical and Pharmaceutical
• Environmental studies
• Replace costly strip chart recorders
• Geothermal

The post PR2000 appeared first on CAS Dataloggers.