The SDR-USB provides an inexpensive, self-contained, and low-power solution for the basic recording of RS-232 serial data to a removable USB memory stick in a standard PC-compatible text file. It offers a user-configurable baud rate, a real-time clock for optional timestamps, a standard FAT32 file format, and LED status indicators. It is designed to be easy to use and does not require any special software. It is the perfect solution for capturing RS-232 data in embedded, in-field, or remote applications where a PC would be too large or impractical.

The SDR-USB does not require any special configuration software, all settings are controlled by a simple text file stored on the USB stick. The configuration flexibility and straightforward setup make it easy to deploy into any serial data recording application. You can be recording your data within minutes–not days or weeks.

Included:

• VersaLog SDR-USB
• DC Power Cable
• 2 GB USB Memory Stick

Common applications for a serial data logger:

• Capturing Data from Weighing and Measurement Equipment
• Recording Serial Printer Output Data
• Logging NMEA GPS Data
• Capturing the Console/Debugging Output from Equipment
• Site Surveying for Wind and Solar Power Generation
• Petroleum & Oil Services Equipment Logging
• Automotive Design & Vehicle Testing
• Aerospace Data Logging

The post VersaLog SDR-USB appeared first on CAS Dataloggers.

Advanced design and technology plus 25 years of geotechnical expertise have produced the dataTaker DT80GW WiFi Geotechnical Data Logger – A versatile, powerful – yet low-power & cost-effective logger.

It supports vibrating wire and other geotechnical sensors such as Slope Indicator, RST Instruments, Geokon, Soil Instruments, Roctest, AGI – Applied Geomechanics Inc. DT80GW is also capable of testing sensor integrity through audible frequency

With temperature compensation (thermistor), 5 analog channels are capable of reading up to 5 vibrating wire sensors. If temperature compensation is not required this logger can read up to 15 vibrating wire sensors.

Further expansion up to 100 sensors (with temperature compensation) or 300 sensors(without temperature compensation) is possible.

Local Wireless Access

With wireless access, no need to have a physical connection to the logger. Send the program, view and download the data, or even modify your settings on a nearby PC or Tablet wirelessly either as a Master (Access Point mode) or Slave (Client).

Automatic Data Delivery

On Client mode, dataTaker can have access to a local router and if the router has internet access it can utilize the DT80GW’s automatic data delivery features to schedule your data to be automatically emailed to your inbox every day, week, month, or other time interval.

More sophisticated systems can make use of the automatic data delivery features to send logged data to an FTP server.

Superior Data Storage & Communications

With the standard unit able to store up to 10 million data points (expandable) you can log as much or as little as you need. Overwrite or stop logging once allocated memory is full, archive data on alarm event, copy to USB memory or transfer via FTP/ Email, the choice is yours.

Communications features include RS232, USB, and Ethernet, which connect to the DT80GW locally, remotely through a modem, or over the Internet.

The post dataTaker DT80GW appeared first on CAS Dataloggers.

Versatile Measurement

The DT80W WiFi Universal Input Data Logger allows you to connect an array of sensors through versatile analog and digital channels, high-speed counter inputs, phase encoder inputs, and programmable serial sensor channels.

Temperature, voltage, current, 4-20mA loops, resistance, bridges, strain gauges, frequency, digital, serial, and calculated measurements can all be scaled, logged, and returned in engineering units or within statistical reporting.

Set up sampling, logging, alarm, and control tasks to suit your requirements while interfaces for smart sensors, GPS, and other intelligent devices expand the dataTaker DT80W flexibility.

Local Wireless Access

With wireless access, no need to have a physical connection to the logger. Send the program, view and download the data, or even modify your settings on a nearby PC or Tablet wirelessly either as a Master (Access Point mode) or Slave (Client).

Automatic Data Delivery

On Client mode, dataTaker can have access to a local router and if the router has internet access it can utilize the DT80W’s automatic data delivery features to schedule your data to be automatically emailed to your inbox every day, week, month, or other time interval.

More sophisticated systems can make use of the automatic data delivery features to send logged data to an FTP server.

The post dataTaker DT80W appeared first on CAS Dataloggers.

The Expert Logger 400 is Delphin‘s new generation of data loggers. It combines the latest communication technology with advanced measurement technology and is based on FPGA technology to make it especially powerful. It can process up to 16 analog input channels at both low and high rates of sampling. Measurement data can be accurately acquired, independently stored and transmitted to the internet or a PC for evaluation via USB, LAN, WLAN or LTE.

Operation Made Simple

Sensors are connected via plug-in screw terminals and a chart clearly shows how channels are arranged. Users always have a good overview of the channels despite their high density. Each set of four terminals can be configured as two differential inputs to measure voltage, currents, thermocouples, or to take measurements from a 4-wire RTD.

Configuration – Fast and Easy

The Expert Logger 400 is simple to configure from a PC. These settings remain stored within the Expert Logger even when disconnected from the power supply. The device settings can also be read out and stored on a PC and analyzed offline without the need for a connected Expert Logger. The offline configuration settings are then simply read into the device when connected. The software used for configuration is simple to operate to let users fully focus on their measurement tasks.

Intelligent Signal Processing

Signal processing using internal software channels significantly simplifies measurement tasks. Flexible calculation channels enable measurement data to undergo further computation and recording. Integrators directly calculate volumes or quantities from time-related measurement data such as mass and discharge flow rates. Limit values can monitor measurement data and be used to switch digital outputs or automatically send emails. Complex signal processing is possible using pulse counters, stop-clock functions, and operating-hours counter. Averages can be calculated and recorded as time-weighted or moving. The Expert Logger‘s software channels clearly set it apart from other loggers and make it very popular among users.

Applications

• Data logging
• Environmental measurement technology
• Product testing
• Measurement data diagnosis
• Lab data acquisition
• Trials and tests
• Energy optimization

The post Delphin Expert Logger 400 appeared first on CAS Dataloggers.

The Expert Logger 300 is Delphin‘s new generation of data loggers. It combines the latest communication technology with advanced measurement technology, and is based on FPGA technology to make it especially powerful. It can process up to 46 analog input channels at both low and high rates of sampling. Measurement data can be accurately acquired, independently stored and transmitted to the internet or a PC for evaluation via USB, LAN, WLAN or LTE.

Operation made simple

Sensors are connected via plug-in screw terminals and a chart clearly shows how channels are arranged. Users always have a good overview of the channels despite their high density. Each set of four terminals can be configured as two differential inputs to measure voltage, currents, thermocouples, or to take measurements from a 4-wire RTD.

Configuration – Fast and Easy

The Expert Logger 300 is simple to configure from a PC. These settings remain stored within the Expert Logger even when disconnected from the power supply. The device settings can also be read out and stored on a PC and analysed offline without the need for a connected Expert Logger. The offline configuration settings are then simply read into the device when connected. The software used for configuration is simple to operate to let users fully focus on their measurement tasks.

Intelligent Signal Processing

Signal processing using internal software channels significantly simplifies measurement tasks. Flexible calculation channels enable measurement data to undergo further computation and recording. Integrators directly calculate volumes or quantities from time related measurement data such as mass and discharge flow rates. Limit values can monitor measurement data and be used to switch digital outputs or automatically send emails. Complex signal processing is possible using pulse counters, stop-clock functions and operating-hours counter. Averages can be calculated and recorded as time-weighted or moving. The Expert Logger‘s software channels clearly set it apart from other loggers and make it very popular among users.

Applications

• Data logging
• Environmental measurement technology
• Product testing
• Measurement data diagnosis
• Lab data acquisition
• Trials and tests
• Energy optimization

The post Delphin Expert Logger 300 appeared first on CAS Dataloggers.

The Expert Logger 200 is Delphin‘s new generation of data loggers. It combines the latest communication technology with advanced measurement technology, and is based on FPGA technology to make it especially powerful. It can process up to 32 analog input channels at both low and high rates of sampling. Measurement data can be accurately acquired, independently stored and transmitted to the internet or a PC for evaluation via USB, LAN, WLAN or LTE.

Operation made simple

Sensors are connected via plug-in screw terminals and a chart clearly shows how channels are arranged. Users always have a good overview of the channels despite their high density. Each set of four terminals can be configured as two differential inputs to measure voltage, currents, thermocouples, or to take measurements from a 4-wire RTD.

Configuration – Fast and Easy

The Expert Logger is simple to configure from a PC. These settings remain stored within the Expert Logger even when disconnected from the power supply. The device settings can also be read out and stored on a PC and analysed offline without the need for a connected Expert Logger. The offline configuration settings are then simply read into the device when connected. The software used for configuration is simple to operate to let users fully focus on their measurement tasks.

Intelligent Signal Processing

Signal processing using internal software channels significantly simplifies measurement tasks. Flexible calculation channels enable measurement data to undergo further computation and recording. Integrators directly calculate volumes or quantities from time related measurement data such as mass and discharge flow rates. Limit values can monitor measurement data and be used to switch digital outputs or automatically send emails. Complex signal processing is possible using pulse counters, stop-clock functions and operating-hours counter. Averages can be calculated and recorded as time-weighted or moving. The Expert Logger‘s software channels clearly set it apart from other loggers and make it very popular among users.

Applications

• Data logging
• Environmental measurement technology
• Product testing
• Measurement data diagnosis
• Lab data acquisition
• Trials and tests
• Energy optimization

The post Delphin Expert Logger 200 appeared first on CAS Dataloggers.

The Expert Logger 100 is among Delphin‘s new generation of data loggers. It combines the latest communication technology with advanced measurement technology and is based on FPGA technology to make it especially powerful. It can process up to 16 analog input channels at both low and high rates of sampling. Measurement data can be accurately acquired, independently stored and transmitted to the internet or a PC for evaluation via USB, LAN, WLAN or LTE.

Operation made simple

Sensors are connected via plug-in screw terminals and a chart clearly shows how channels are arranged. Users always have a good overview of the channels despite their high density. Each set of four terminals can be configured as two differential inputs to measure voltage, currents, thermocouples, or to take measurements from a 4-wire RTD.

Configuration – Fast and Easy

The Expert Logger is simple to configure from a PC. These settings remain stored within the Expert Logger even when disconnected from the power supply. The device settings can also be read out and stored on a PC and analyzed offline without the need for a connected Expert Logger. The offline configuration settings are then simply read into the device when connected. The software used for configuration is simple to operate to let users fully focus on their measurement tasks.

Intelligent Signal Processing

Signal processing using internal software channels significantly simplifies measurement tasks. Flexible calculation channels enable measurement data to undergo further computation and recording. Integrators directly calculate volumes or quantities from time-related measurement data such as mass and discharge flow rates. Limit values can monitor measurement data and be used to switch digital outputs or automatically send emails. Complex signal processing is possible using pulse counters, stop-clock functions, and operating-hours counter. Averages can be calculated and recorded as time-weighted or moving. The Expert Logger‘s software channels clearly set it apart from other loggers and make it very popular among users.

Applications

• Data logging
• Environmental measurement technology
• Product testing
• Measurement data diagnosis
• Lab data acquisition
• Trials and tests
• Energy optimization

The post Expert Logger 100 appeared first on CAS Dataloggers.

Delphin LogMessage LM5000 Data Logger devices are specifically designed as universal data loggers.

Product Highlights

• Reliable data logger including potential isolation
• 16 Universal analog inputs for thermocouples, RTDs, mV or mA signals
• High-precision differential inputs with up to 24-bit resolution
• Galvanic isolation, isolation voltages of up to 650 V
• Storage capacity of up to 1 billion measurement values (standard = 250 million)
• Measurement data portrayed as trends and exportable in ASCII format
• Excellent return on investment
• LAN interface for configuration and data transfer
• Serial interfaces, Modbus RTU and TCP/IP
• A range of internal calculation and logic channels
• Monitoring and alarm functions

The LogMessage LM5000 works completely independently as a data logger for acquiring, monitoring, computing and storing measurement data. The internal data memory allows continuous recording of up to 250 million samples. LogMessage is available in nine different styles.

ProfiSignal Go is the basic software, used for online/offline monitoring and measurement data analysis. Just three steps are required to display measurement data as trends, to analyze the data, and to evaluate offline data.

Other software is available for all types of applications:

• ProfiSignal Go: Software for data acquisition
• ProfiSignal Basic: software for process visualization and monitoring
• ProfiSignal Klicks: software for the automation of process and measurement procedures

Systems are delivered to match user requirements: e.g. long-term monitoring, machine monitoring, or remote monitoring.

Examples of LogMessage

• Data Logger for fault diagnostics
• Energy efficiency measurements
• Experiments and product testing
• Remote data transfer via GSM / UMTS
• Testing and test stand automation
• Service data recording and fault detection
• GPS Logging

Included in Delivery of a LogMessage logger:

• LogMessage Device
• Drivers for LabView ™ and DASYLab ™
• Modbus TCP and OPC Server Interface
• OCX driver to enable self-programming

The post Delphin LogMessage LM5000 appeared first on CAS Dataloggers.

The new DT82E Environmental Data Logger Series 4 version has increased sampling speed, measurement range, and programmable analog output.

Versatile Measurement

Superior Data Storage & Communications

The post dataTaker DT82E appeared first on CAS Dataloggers.

The new DT82EM Environmental Data Logger Series 4 version has increased sampling speed, measurement range, and programmable analog output.

The dataTaker DT82EM intelligent data logger is a fully featured low-powered logging platform with an integrated cellular modem, making it perfect for remote applications. The rugged design and wide operating temperature range of the DT82EM provide reliable operation in virtually any environment.

The DT82EM’s perfect balance of performance with low power also allows you to use a smaller solar panel without compromising on functionality.

Versatile Measurement

Connect an array of sensors through versatile analog and digital channels, high-speed counter inputs, phase encoder inputs, and programmable serial sensor channels.

Temperature, voltage, current, 4-20mA loops, resistance, bridges, strain gauges, frequency, digital, serial, and calculated measurements can all be scaled, logged, and returned in engineering units or within statistical reporting.

Set up sampling, logging, alarm, and control tasks to suit your requirements while interfaces for smart sensors, GPS, and other intelligent devices expand the DT82EM flexibility.

Automatic Data Delivery

Forget traveling long distances to get your data. Utilize the DT82EM’s automatic data delivery features to schedule your data to be automatically emailed to your inbox every day, week, month, or other time intervals.

More sophisticated systems can make use of the automatic data delivery features to send logged data to an FTP server. Alarm conditions can also trigger data delivery in addition to sending alarm messages to multiple email addresses or mobile phones.

The post dataTaker DT82EM appeared first on CAS Dataloggers.