With its Expert Vibro EV-4 Data Acquisition System device, Delphin has successfully combined the processing of complex functions with high levels of flexibility in a user-friendly system. Vibration measurement systems can now be used where they had previously been economically infeasible. The device is equipped with a high-powered, dual-core FPGA processor based on ARM technology giving users ample reserves of processing power.

Users are able to switch between voltage measurement, IEPE, or shaft vibration sensors. Integrated comparators and digital inputs allow flexible triggering. Measurement data is monitored “on the fly” with digital outputs being switched within msecs in the event of limit value violations.

Vibrations deliver information on the condition of bearings, shafts, and machinery and generally have a major effect on levels of quality in production processes. They should, therefore, be continuously acquired, intelligently evaluated, and condensed into meaningful data for monitoring. In critical situations, machinery needs to be shut down within milliseconds.

The Delphin Expert Vibro EV-4 combines the requirements and functioning of modern vibration measurement systems into a highly compact device. Other systems usually require multiple pieces of equipments. Vibration measurement is made easy with Expert Vibro. System installation and familiarization are short so that users can quickly start processing their data.

Expert Vibro provides users with analysis and monitoring functions, intelligent signal processing, an independent data storage capability, and versatile Fieldbus connections – all in a single device. Right from the outset, users save costs and avoid troublesome interface problems.

Of special benefit is the modular system for signal processing with a range of preprocessing functions. Filters, such as high, low, or bandpass with rectifiers, integrators, differentiators or decimators can be selected to make up a preprocessing sequence. Multiple preprocessing sequences are able to run in parallel in order to evaluate an input signal. This gives users an especially high level of flexibility.

Non-periodic signals, such as in fault diagnostics, can be analyzed precisely using Expert Vibro. In continuous sampling mode, even the smallest of irregularities are recorded. Expert Vibro measures, monitors, and records fully independently. Expert Vibro is equipped with its own internal data storage capability making it especially reliable and secure.

The post Delphin Expert Vibro EV-4 appeared first on CAS Dataloggers.

The Delphin Expert Transient ET-4 Data Acquisition System is a high speed, high accuracy data acquisition system capable of synchronously acquiring and saving analog measurement data up to a sampling rate of 50 kHz per channel in combination with digital signals.

Available with 4 analog inputs as well as 4 digital inputs. It can be extended by up to 100 analog or digital inputs.

Input Signals:

• Acquisition and analysis of high-speed, transient signals
• Triggered or continuous recording modes
• Synchronous acquisition of 4  galvanically isolated, analog signals
• Sampling rates of up to 50 kHz per channel
• High measurement precision (24-bit ADC)
• Four synchronous digital inputs

Trigger and Monitoring Functions:

• User-defined, multiple, flexible trigger events
• User-defined data storage partitions and triggers
• High-speed digital outputs for limit value violations
• Alarms via email or text message

Signal Conditioning:

• Online computation of effective and peak values

Interfaces and Design:

• Measurement and device configuration via LAN / Wi-Fi
• Remote connectivity via Wi-Fi, UMTS or LTE
• Highly compact design

Data Recording:

• Independent, up to internal 32 GB data storage capability
• Long-term data recording to NAS or SCSI drives
• Absolute-time synchronization via GPS or NTP
• Automated FTP upload
• Internal time synchronization via PTP

The Expert Transient is suitable for fault diagnostics in machinery and plants. Typical applications include the evaluation of pressure pulses/surges, fast process monitoring and controller optimization, shock and vibration measurement, and materials research and environmental simulation. It can also be supplied in a robust mobile measurement case for field deployments in harsh environments. The standard device, equipped with plug-in terminals, is ideal for use with test stands or in laboratories.

Other Models in the Series:

• ET-8
• ET-16

The post Delphin Expert Transient ET-4 appeared first on CAS Dataloggers.

With its Expert Vibro EV-16 Data Acquisition System device, Delphin has successfully combined the processing of complex functions with high levels of flexibility in a user-friendly system. Vibration measurement systems can now be used where they had previously been economically infeasible. The device is equipped with a high powered, dual-core FPGA processor based on ARM technology giving users ample reserves of processing power.

Users are able to switch between voltage measurement, IEPE or shaft vibration sensors. Integrated comparators and digital inputs allow flexible triggering. Measurement data is monitored “on the fly” with digital outputs being switched within msecs in the event of limit value violations.

Vibrations deliver information on the condition of bearings, shafts, and machinery and generally have a major effect on levels of quality in production processes. They should, therefore, be continuously acquired, intelligently evaluated and condensed into meaningful data for monitoring. In critical situations, machinery needs to be shut down within milliseconds.

Expert Vibro combines the requirements and functioning of modern vibration measurement systems into a highly compact device. Other systems usually require multiple equipment. Vibration measurement is made easy with Expert Vibro. System installation and familiarization are short so that users can quickly start processing their data.

Expert Vibro provides users with analysis and monitoring functions, intelligent signal processing, an independent data storage capability and versatile Fieldbus connections – all in a single device. Right from the outset, users save costs and avoid troublesome interface problems.

Of special benefit is the modular system for signal processing with a range of preprocessing functions. Filters, such as high, low, or bandpass with rectifiers, integrators, differentiators or decimators can be selected to make up a preprocessing sequence. Multiple preprocessing sequences are able to run in parallel in order to evaluate an input signal. This gives users an especially high level of flexibility.

Non-periodic signals, such as in fault diagnostics, can be analyzed precisely using Expert Vibro. In continuous sampling mode, even the smallest of irregularities are recorded. Expert Vibro measures, monitors, and records fully independently. Expert Vibro is equipped with its own internal data storage capability making it especially reliable and secure.

The post Delphin Expert Vibro EV-16 appeared first on CAS Dataloggers.

The Delphin Expert Transient ET-16 Data Acquisition System is a high speed, high accuracy data acquisition system capable of synchronously acquiring and saving analog measurement data up to a sampling rate of 50 kHz per channel in combination with digital signals.

Available with 16 analog inputs as well as 4 digital inputs. It can be extended by up to 100 analog or digital inputs.

Input Signals:

• Acquisition and analysis of high-speed, transient signals
• Triggered or continuous recording modes
• Synchronous acquisition of 16 galvanically isolated, analog signals
• Sampling rates of up to 50 kHz per channel
• High measurement precision (24-bit ADC)
• Four synchronous digital inputs

Trigger and Monitoring Functions:

• User-defined, multiple, flexible trigger events
• User-defined data storage partitions and triggers
• High-speed digital outputs for limit value violations
• Alarms via email or text message
• Suitable for the acquisition of periodic signals (option to calculate FFT and characteristic values)

Signal Conditioning:

• Online computation of effective and peak values
• Upper wave analysis
• Online FFT analysis

Interfaces and Design:

• Measurement and device configuration via LAN / Wi-Fi
• Remote connectivity via Wi-Fi, UMTS or LTE
• Highly compact design

Data Recording:

• Independent, internal 32 GB data storage capability
• Long-term data recording to NAS or SCSI drives
• Absolute-time synchronization via GPS or NTP
• Automated FTP upload
• Internal time synchronization via PTP

The Expert Transient is suitable for fault diagnostics in machinery and plants. Typical applications include the evaluation of pressure pulses /surges, fast process monitoring and controller optimization, shock and vibration measurement, and materials research and environmental simulation. It can also be supplied in a robust mobile measurement case for field deployments in harsh environments. The standard device, equipped with plug-in terminals, is ideal for use with test stands or in laboratories.

The post Delphin Expert Transient ET-16 appeared first on CAS Dataloggers.

The Delphin Expert Transient ET-8 Data Acquisition System is a high speed, high accuracy data acquisition system capable of synchronously acquiring and saving analog measurement data up to a sampling rate of 50 kHz per channel in combination with digital signals.

Available with 8 analog inputs as well as 4 digital inputs. It can be extended by up to 100 analog or digital inputs.

Input Signals:

• Acquisition and analysis of high-speed, transient signals
• Triggered or continuous recording modes
• Synchronous acquisition of 8  galvanically isolated, analog signals
• Sampling rates of up to 50 kHz per channel
• High measurement precision (24-bit ADC)
• Four synchronous digital inputs

Trigger and Monitoring Functions:

• User-defined, multiple, flexible trigger events
• User-defined data storage partitions and triggers
• High-speed digital outputs for limit value violations
• Alarms via email or text message
• Suitable for the acquisition of periodic signals (option to calculate FFT and characteristic values)

Signal Conditioning:

• Online computation of effective and peak values
• Upper wave analysis
• Online FFT analysis

Interfaces and Design:

• Measurement and device configuration via LAN / Wi-Fi
• Remote connectivity via Wi-Fi, UMTS or LTE
• Highly compact design

Data Recording:

• Independent, internal 32 GB data storage capability
• Long-term data recording to NAS or SCSI drives
• Absolute-time synchronization via GPS or NTP
• Automated FTP upload
• Internal time synchronization via PTP

The Expert Transient is suitable for fault diagnostics in machinery and plants. Typical applications include the evaluation of pressure pulses /surges, fast process monitoring and controller optimization, shock and vibration measurement, and materials research and environmental simulation. It can also be supplied in a robust mobile measurement case for field deployments in harsh environments. The standard device, equipped with plug-in terminals, is ideal for use with test stands or in laboratories.

The post Delphin Expert Transient ET-8 appeared first on CAS Dataloggers.

With its Expert Vibro EV-8 Data Acquisition System device, Delphin has successfully combined the processing of complex functions with high levels of flexibility in a user-friendly system. Vibration measurement systems can now be used where they had previously been economically infeasible. The device is equipped with a high powered, dual-core FPGA processor based on ARM technology giving users ample reserves of processing power.

Users are able to switch between voltage measurement, IEPE or shaft vibration sensors. Integrated comparators and digital inputs allow flexible triggering. Measurement data is monitored “on the fly” with digital outputs being switched within msecs in the event of limit value violations.

Vibrations deliver information on the condition of bearings, shafts, and machinery and generally have a major effect on levels of quality in production processes. They should, therefore, be continuously acquired, intelligently evaluated and condensed into meaningful data for monitoring. In critical situations, machinery needs to be shut down within milliseconds.

The Expert Vibro combines the requirements and functioning of modern vibration measurement systems into a highly compact device. Other systems usually require multiple equipment. Vibration measurement is made easy with Expert Vibro. System installation and familiarization are short so that users can quickly start processing their data.

Expert Vibro provides users with analysis and monitoring functions, intelligent signal processing, an independent data storage capability and versatile Fieldbus connections – all in a single device. Right from the outset, users save costs and avoid troublesome interface problems.

Of special benefit is the modular system for signal processing with a range of preprocessing functions. Filters, such as high, low, or bandpass with rectifiers, integrators, differentiators or decimators can be selected to make up a preprocessing sequence. Multiple preprocessing sequences are able to run in parallel in order to evaluate an input signal. This gives users an especially high level of flexibility.

Non-periodic signals, such as in fault diagnostics, can be analyzed precisely using Expert Vibro. In continuous sampling mode, even the smallest of irregularities are recorded. Expert Vibro measures, monitors, and records fully independently. Expert Vibro is equipped with its own internal data storage capability making it especially reliable and secure.

The post Delphin Expert Vibro EV-8 appeared first on CAS Dataloggers.