K-PT

Influx K-PT

  • Connects up to 4 RTD sensors to the K-Series K-Box/KAN8 via the Analog inputs
  • Simple signal configuration using a DBC file
  • Supplied with configuration software Influx K-Cal for Windows®
  • Refresh rates achievable (4 channels 20Hz)
  • ABS enclosure
  • An 8% Tariff Surcharge will be added to this item at checkout

$905.00

Normal delivery 1-2 weeks

Get a QuoteGet More Info
SKU: INF2212 Categories: ,

Description

Influx K-PT PT100/1000 Measurement Module

Influx’s K-PT module is designed to connect PT100/1000 sensors to a K-Box or K-AN8 voltage measurement device that normally cannot support these sensors. The powered K-PT module simply enables PT100/1000 sensors to be connected via the D-Sub 9 terminals and will output the signal voltages to an Analog measurement device.

Calibration and sampling rates can be configured using the freely distributed K-Cal software.

The Pt100/1000 is one of the most accurate temperature sensors. Not only does it provide good accuracy, it also provides excellent stability and repeatability. Pt100/Pt1000 are also relatively immune to electrical noise, and therefore, well suited for temperature measurement in industrial environments, especially around motors, generators and other high voltage equipment. Using the K-PT add-on module, it is possible to connect and accurately measure Pt100 and Pt1000 sensors.

Key Features

  • Influx K-PT Connects up to 4 RTD sensors to the K-Series K-Box/KAN8 via the Analog inputs
  • Simple signal configuration using a DBC file
  • Supplied with configuration software Influx K-Cal for Windows®
  • Refresh rates achievable (4 channels 20Hz)
  • ABS enclosure

Advantages

  • Accuracy, excellent stability and repeatability
  • Relatively immune to electric noise
  • Well suited and widely used for temperature measurements in industrial environments. Especially around motors, generators and other high voltage equipment
  • Easily configurable software

Specifications

Technical Data Description
Measurement Inputs 4
Type of measured sensors PT100/1000
Measurement range -200degC to +850degC
Linearization Standard tables for different types of ALPHA
Internal resolution 18 Bit
Internal sampling rate per channel 6.25kHz
Measurement data rate per channel 1, 2, 5, 10, 20Hz
HW input filter Input filter common mode; Output filter on the amplifier; Differential-Mode Corner Frequency 7.6Hz, Common-Mode Corner Frequency: 159Hz
SW input filter A digital filter in the ADC module is automatically adjusted to the sampling rate. With the current setting (sampling at 6.25kHz), the filter has a frequency of 3kHz
Broken sensor detection Yes
Measurement current The current changes, depending on the resistance of the sensor, within the range: 212-224µA
Gain error at 25degC ± 0.1% of measured value
Offset and scaling error ±1K
Gain drift ±10ppm/K of measured value
Zero drift ±5mK/K
CAN channel Isolation 1000VDC minimum
CAN power supply Isolation CAN and Power are galvanically connected
CAN interface CAN 2.0B, up to 1Mbit/s
Configuration Configuration with K-Box Cal application by company protocol
Power supply 4.5V to 36V DC.
Power consumption Typ. 1.9W
Designation housing ABS
Protection class IP65
Weight 450g
Dimensions 115x46x105mm
CAN power supply Two 9 pin D-type connectors with duplicate signals
Signal inputs Two channels are integrated into a 9 pin D-type connector
Operation temperature range -40degC to +85degC

Software

K-CAL

K-CAL is a freely distributable Windows PC application that accompanies all the K-Series products from Influx. K-Cal software is specifically designed to ensure you harness the full potential of all the K-series devices with precision and convenience.

Effortlessly configure your connected K-Series device using our user-friendly application K-CAL, or explore data analysis with the dynamic live view function.

Influx K-Cal offers powerful features that enable you to set byte orders, adjust unit measurements, set baud rates, and optimize power consumption through configurable sleep modes.

K-CAL lets you do everything from the unified export of DBC files for post-processing to real-time data visualization on the oscilloscope to saving and exporting that data from the oscilloscope.

Downloads

Software

K-CAL for Windows – Version 3.38 (MSI file)

Manuals

K-PT Pinouts (PDF file)

Reviews

There are no reviews yet.

Be the first to review “Influx K-PT”