Applications
• Energy audits
• Electrical diagnostics
• Industrial maintenance
• Simple, effective ergonomics
In its site-proof case with the mounting kit, it can be installed very easily at the top of an electricity pole. The large backlit display is easy to read in all circumstances. It is equipped with 1 voltage inputs and 4 current inputs.

RMS and DC measurements
• AC and/or DC voltages up to 1,000 V
• currents up to 10 kA AC or 5 kA DC (depending on the current sensor).
• active, reactive and apparent power values
• active, reactive and apparent energy values
• fundamental and balanced active power values and unbalanced active power values
• measurements and characterization on motors (via Android application)
• breakdown of energy losses
• phase information: cos φ, tan Φ, power factor (PF)
• crest factor
• THD calculation for currents and voltages
• DC, 50 Hz, 60 Hz and 400 Hz (Naval, etc.) measurements

PEL Transfer software
With the PEL Transfer software you can:
• set up your PEL
• check the connections before recording begins
• download the measurements recorded in the PEL
• view the results of the various measurements and analyses
Additional advantage: PEL Transfer converts your electricity consumption into the local currency (€, £, $, etc. – 8 tariff ranges).

Communication and networks
The PEL 110 models offer multiple communication modes:
– USB , the simplest link when not working remotely
– Ethernet RJ45 or Wi-fi (server): connect your PEL11x to the server to communicate from any workstation in the network equipped with the PEL Transfer software
– Wi-fi (Access Point):
• Create a direct link between the PEL11x and your computer
• The Access Point (AP) mode supports up to 5 clients

A PEL 115 IS DELIVERED WITH 1 bag for the accessories, 5 x IP67 voltage cables, 5 lockable crocodile clips, 1 set of inserts/rings, 1 SD card, 1 SD Card-USB adapter, 1 USB cable, PEL TRANSFER PC software & User’s Manual downloadable from our website, 1 Quick Start Guide.

The post AEMC PEL 115 appeared first on CAS Dataloggers.

Applications
• Energy audits
• Electrical diagnostics
• Industrial maintenance

Simple, Effective Ergonomics
• compact and magnetized
• 3 voltage inputs and 3 current inputs
• ideal for use in cold rooms (-20 °C)
• self-powered via the phase (option)

RMS and DC Measurements
• AC and/or DC voltages up to 1,000 V
• currents up to 10 kA AC or 5 kA DC (depending on the current sensor).
• active, reactive and apparent power values
• active, reactive and apparent energy values
• fundamental and balanced active power values and unbalanced active power values
• measurements and characterization on motors (via Android application)

Functions
• breakdown of energy losses
• phase information: cos φ, tan Φ, power factor (PF)
• crest factor
• THD calculation for currents and voltages
• DC, 50 Hz, 60 Hz and 400 Hz (Naval, etc.) measurements

PEL Transfer software
With the PEL Transfer software you can:
• set up your PEL
• check the connections before recording begins
• download the measurements recorded in the PEL
• view the results of the various measurements and analyses
Additional advantage: PEL Transfer converts your electricity consumption into the local currency (€, £, $, etc. – 8 tariff ranges).

Communication and Networks
The PEL 110 models offer multiple communication modes:
– USB , the simplest link when not working remotely
– Ethernet RJ45 or Wifi (server): connect your PEL11x to the server to communicate from any workstation in the network equipped with the PEL Transfer software
– Wifi (Access Point):
• Create a direct link between the PEL11x and your computer
• The Access Point (AP) mode supports up to 5 clients

A PEL 112 IS DELIVERED WITH: 1 carrying bag, 4 voltage cables, 4 crocodile clips, 1 set of inserts/ rings, 1 SD card, 1 SD Card-USB adapter, 1 USB cable, PEL TRANSFER PC software & User’s Manual downloadable from our website, 1 Quick Start Guide.

The post AEMC PEL 112 appeared first on CAS Dataloggers.

Communication and networks
The PEL 110 models offer multiple communication modes:
– USB, the simplest link when not working remotely
– Ethernet RJ45 or Wi-fi (server): connect your PEL11x to the server to communicate from any workstation in the network equipped with the PEL Transfer software
– Wi-fi (Access Point):
• Create a direct link between the PEL11x and your computer
• The Access Point (AP) mode supports up to 5 clients

A PEL 113 IS DELIVERED WITH: 1 carrying bag, 4 voltage cables, 4 crocodile clips, 1 set of inserts/ rings, 1 SD card, 1 SD Card-USB adapter, 1 USB cable, PEL TRANSFER PC software & User’s Manual downloadable from our website, 1 Quick Start Guide.

The post AEMC PEL 113 appeared first on CAS Dataloggers.

The AL-2VA is designed to allow users to monitor one voltage channel and one current channel. Allowing users to monitor the main voltage supply and the load current, therefore enabling staff to determine the energy consumption of various appliances or items of equipment.

Setting up the Electrocorder AL-2VA is easy, making it suitable for non-technical staff. Using the supplied (free) Windows software, Electrosoft; input the location details for the logging and choose the logging period. Electrosoft will print the necessary dispatch/ return documentation including user instructions. All data is included in a database of dispatches and returns, allowing you to track the location of multiple loggers.

Why is the Electrocorder better than other similarly priced competitors? The Electrocorder range uses a constant sampling technique, unlike the single reading of competitors. When the loggers start to record, they sample every channel 16 times per cycle, a cycle is 16ms at 60Hz. At the end of each averaging period, 3 quantities are saved for each channel, the True RMS average, the Max, which is the highest cycle value during the period, and the Min, the lowest cycle value. This means that it will record all the peaks and troughs which are one cycle or longer. The voltage and current levels are stored with dates and times. With the backup battery, the logger can continue to record for months. On the logger, data recording is signified by a flashing green light. A red light advises users that the unit has completed recording.

When the logger has finished recording, the stored data is uploaded to a PC via the supplied USB cable. Using Electrosoft, the recorded voltage and current levels have dates and times that can be viewed in both tabular and graphical form, exported to a spreadsheet, or saved to a file. Graphs can be printed showing the recorded levels and the allowable tolerance bands. Electrosoft also provides an internal database that effectively manages the distribution of multiple loggers.

The post Electrocorder AL-2VA appeared first on CAS Dataloggers.

The PEL 52 represents an affordable and user-friendly power and energy data logger, suitable for both single and split-phase applications. It is specifically designed for electricians, engineers, and contractors working in residential and light commercial areas. This device allows effortless measurement, recording, and analysis of crucial energy data. Generating reports is a breeze, requiring minimal configuration time and effort, with the added benefit of having standard and customizable report options available.

The instrument is powered by V1 inputs from (90 to 690) V. Two 800 mAh NIMH batteries supply power if a source is not available.

The instrument’s design enables it to be installed inside a load center panel (including the current sensors) allowing the door to close on most panels. The PEL 52 series energy loggers measure and record one or two True RMS voltage inputs up to 690 V and current inputs up to 3600 A (sensor dependent), Watts, VARS, VA, and Energy (kWh and kVA). Power Factor (PF), Displacement Power Factor (DPF), and Frequency are calculated and recorded as well. All variables are recorded and stored at a one-second interval and on user-selectable demand intervals from 1 to 60 minutes.

By combining energy-saving techniques with detailed power consumption monitoring, residential and commercial builders can gain valuable insights into their energy usage, pinpoint areas for improvement, and monitor their advancements in energy conservation efforts. Ultimately, this results in decreased energy expenses, a diminished environmental footprint, and improved operational efficiency.

Key Features

• Accurate and reliable: Provides precise readings over time to make accurate assessments of energy consumption
• Real-time monitoring to identify patterns, monitor changes, and make informed decisions to optimize energy usage
• Works with a wide range of electrical equipment, systems and residential and light commercial single or split phase measurements
• Capable of performing load studies in compliance with NEC 220.87
• Log data over an extended period, to analyze historical trends and identify areas for improvement
• DataView software included for data analysis and report generation
• Rugged and durable: withstands the demands of real-world applications
• Wi-Fi communication and remote viewing with integrated web server (AndroidTM, iOS, Windows, etc.)
• Compact casing with built-in magnets for mounting easily inside electrical cabinets

Applications

• Load surveys – Find out how much energy each item of equipment consumes operating at its min/max power level.
• Energy analysis – Estimate energy consumption before and after the improvements.
• Energy surveys – The measurements for energy surveys must be performed at several locations on the evaluation site.

The post AEMC PEL 52 appeared first on CAS Dataloggers.

The AEMC Powerpad III 8333 Three Phase Power Quality Analyzer is an easy-to-use, compact and shock resistant three-phase power quality analyzer. It enables technicians and engineers to measure and carry out diagnostics and power quality work on single- or three-phase networks. Three current and four voltage input terminals are provided are provided. It is IEC 61000-4-30 Class B and safety rated to 600V CAT IV.

Model 8333 has memory available for storing trend data, alarms, transients, and snapshot data. Capable of storing up to 12 screen snapshots, up to 51 captured transients that contain four cycles for each active input, and 4,000 alarm events from up to 10 different parameters. Trend data can also be recorded for days, weeks or even months.

Kit includes three MN193 current probes, four black 10 ft voltage leads, four black alligator clips, twelve color-coded input ID markers, NiMH battery, 110/240V power adapter with USB stick supplied with product user manual and DataView software.

Applications include:

• Verification of power distribution circuits
• In-plant troubleshooting of power distribution panels and individual machinery
• Monitor pad mount transformers and phase unbalances
• Determine harmonic problems originating from source or load
• Determine transformer K-Factor

The post AEMC Powerpad III 8333 appeared first on CAS Dataloggers.

The Powerpad III 8336 Three Phase Power Quality Analyzer has 2GB of memory available for storing trend data. Additional internal memory is used to let you store alarms, transients, and snapshot data. Capable of storing up to 50 screen snapshots, up to 210 captured transients that contain four cycles for each active input or inrush data for up to 10 minutes, and 10,000 alarm events from up to 40 different parameters. Trend data can also be recorded for days, weeks or even months. Inrush current can also be captured and stored.

Kit includes:

• 5 black 10 ft voltage leads
• 5 black alligator clips
• 12 color-coded input ID markers
• USB cable
• NiMH battery
• 110/240V power adapter with US power cord
• Toolbag
• Soft carry pouch
• User guide
• USB stick supplied with product manual and DataView® software

Applications include:

• Verification of power distribution circuits
• In-plant troubleshooting of power distribution panels and individual machinery
• Monitor pad mount transformers and phase unbalances
• Determine harmonic problems originating from source or load
• Determine transformer Factor-K
• Energy metering (kVAh, VARh, kWh)

The post AEMC Powerpad III 8336 appeared first on CAS Dataloggers.

The EC-2VA AC Voltage Current Data Logger is specifically designed to monitor one voltage channel and one current. It allows you to monitor the main voltage supply and the load current, enabling staff to determine whether a voltage problem is load-related or not.

The Electrocorder range is designed to allow electrical distribution companies to cost-effectively monitor single and three-phase supplies. Our products allow voltage problems to be highlighted quickly for further investigation. The EC-2VA is designed to allow engineering staff to monitor single-phase voltage and current.

The voltage and current levels are stored with dates and times. With the backup battery, the Electrocorder can continue to record for a year. On the logger, the recording is signified by a flashing green light. A red light advises users that the unit has completed recording.

The post Electrocorder EC-2VA appeared first on CAS Dataloggers.

Why is the Electrocorder better than other similarly priced competitors? The Electrocorder range use a constant sampling technique, unlike the single reading of competitors. When the loggers start to record, they sample every channel 16 times per cycle, a cycle is 16ms at 60Hz and 20ms at 50Hz. At the end of each averaging period, 3 quantities are saved for each channel, the True RMS average, the Max, which is the highest cycle value during the period and the Min, lowest cycle value. This means that it will record all the peaks and troughs which are one cycle or longer.

The voltage and current levels are stored with dates and times. With the back-up battery, the Electrocorder can continue to record for months.

Read More About the EC-7VAR Power Energy Data Logger:

The post Electrocorder EC-7VAR appeared first on CAS Dataloggers.

The DigiRail-VA AC Power Analysis Data Logger is specifically designed for single phase AC power analysis applications, it is able to measure the most important AC signals and retransmit them in both analog and digital ways.

It measures and calculates:

• Voltage: 0 to 300 Vac (True-RMS)
• Current: 0 to 5 Aac (True-RMS) – It does allow the use of CTs for higher current applications
• Active Power
• Reactive power
• Apparent power
• Frequency: 45 to 65  Hz
• Power Factor: 0.00 to 1.00 All in a single, compact, DIN rail mounting unit featuring RS485 /Modbus-RTU interface as standard (baud rate from 1200 to 115200, configurable parity) allowing easy access to all the parameters by any SCADA package or Modbus capable PLC.
• Analog retransmission (user selectable 4-20mA and/or 0-10V – all by software; no jumpers)
• Any one of the values can be re-scaled and retransmitted using the onboard analog outputs
• Full 2500 Vrms isolation between the high voltage/current inputs and the low voltage signals
• Protects your upstream instruments
• High accuracy measurements
• Accuracy of Voltage, Current & Power  readings over RS485 is +/- 0.25% and +/- 0.5% over the Analog Retransmission
• Accuracy of the Frequency and Power Factor readings over RS485 is +/- 0.5% and +/- 1% over the Analog Retransmission
  (Please note, however, that the DigiRail-VA is not intended for and should not be used for commercial energy metering applications)
• Wide-Ranging 10-40Vdc power supply requiring just 2.5 W. It is suitable for most standard low voltage industrial supplies.

The post Novus DigiRail-VA appeared first on CAS Dataloggers.