Applications
• Energy audits
• Electrical diagnostics
• Industrial maintenance
• Simple, effective ergonomics
In its site-proof case with the mounting kit, it can be installed very easily at the top of an electricity pole. The large backlit display is easy to read in all circumstances. It is equipped with 1 voltage inputs and 4 current inputs.

RMS and DC measurements
• AC and/or DC voltages up to 1,000 V
• currents up to 10 kA AC or 5 kA DC (depending on the current sensor).
• active, reactive and apparent power values
• active, reactive and apparent energy values
• fundamental and balanced active power values and unbalanced active power values
• measurements and characterization on motors (via Android application)
• breakdown of energy losses
• phase information: cos φ, tan Φ, power factor (PF)
• crest factor
• THD calculation for currents and voltages
• DC, 50 Hz, 60 Hz and 400 Hz (Naval, etc.) measurements

PEL Transfer software
With the PEL Transfer software you can:
• set up your PEL
• check the connections before recording begins
• download the measurements recorded in the PEL
• view the results of the various measurements and analyses
Additional advantage: PEL Transfer converts your electricity consumption into the local currency (€, £, $, etc. – 8 tariff ranges).

Communication and networks
The PEL 110 models offer multiple communication modes:
– USB , the simplest link when not working remotely
– Ethernet RJ45 or Wi-fi (server): connect your PEL11x to the server to communicate from any workstation in the network equipped with the PEL Transfer software
– Wi-fi (Access Point):
• Create a direct link between the PEL11x and your computer
• The Access Point (AP) mode supports up to 5 clients

A PEL 115 IS DELIVERED WITH 1 bag for the accessories, 5 x IP67 voltage cables, 5 lockable crocodile clips, 1 set of inserts/rings, 1 SD card, 1 SD Card-USB adapter, 1 USB cable, PEL TRANSFER PC software & User’s Manual downloadable from our website, 1 Quick Start Guide.

The post AEMC PEL 115 appeared first on CAS Dataloggers.

Applications
• Energy audits
• Electrical diagnostics
• Industrial maintenance

Simple, Effective Ergonomics
• compact and magnetized
• 3 voltage inputs and 3 current inputs
• ideal for use in cold rooms (-20 °C)
• self-powered via the phase (option)

RMS and DC Measurements
• AC and/or DC voltages up to 1,000 V
• currents up to 10 kA AC or 5 kA DC (depending on the current sensor).
• active, reactive and apparent power values
• active, reactive and apparent energy values
• fundamental and balanced active power values and unbalanced active power values
• measurements and characterization on motors (via Android application)

Functions
• breakdown of energy losses
• phase information: cos φ, tan Φ, power factor (PF)
• crest factor
• THD calculation for currents and voltages
• DC, 50 Hz, 60 Hz and 400 Hz (Naval, etc.) measurements

PEL Transfer software
With the PEL Transfer software you can:
• set up your PEL
• check the connections before recording begins
• download the measurements recorded in the PEL
• view the results of the various measurements and analyses
Additional advantage: PEL Transfer converts your electricity consumption into the local currency (€, £, $, etc. – 8 tariff ranges).

Communication and Networks
The PEL 110 models offer multiple communication modes:
– USB , the simplest link when not working remotely
– Ethernet RJ45 or Wifi (server): connect your PEL11x to the server to communicate from any workstation in the network equipped with the PEL Transfer software
– Wifi (Access Point):
• Create a direct link between the PEL11x and your computer
• The Access Point (AP) mode supports up to 5 clients

A PEL 112 IS DELIVERED WITH: 1 carrying bag, 4 voltage cables, 4 crocodile clips, 1 set of inserts/ rings, 1 SD card, 1 SD Card-USB adapter, 1 USB cable, PEL TRANSFER PC software & User’s Manual downloadable from our website, 1 Quick Start Guide.

The post AEMC PEL 112 appeared first on CAS Dataloggers.

Communication and networks
The PEL 110 models offer multiple communication modes:
– USB, the simplest link when not working remotely
– Ethernet RJ45 or Wi-fi (server): connect your PEL11x to the server to communicate from any workstation in the network equipped with the PEL Transfer software
– Wi-fi (Access Point):
• Create a direct link between the PEL11x and your computer
• The Access Point (AP) mode supports up to 5 clients

A PEL 113 IS DELIVERED WITH: 1 carrying bag, 4 voltage cables, 4 crocodile clips, 1 set of inserts/ rings, 1 SD card, 1 SD Card-USB adapter, 1 USB cable, PEL TRANSFER PC software & User’s Manual downloadable from our website, 1 Quick Start Guide.

The post AEMC PEL 113 appeared first on CAS Dataloggers.

The AEMC DL913 AC Current Data Logger is a 3-channel AC current data logger with three integral flexible current sensors. Each sensor is 24 inches long and capable of wrapping around a 7.64-inch conductor. The DL913 has two measurement ranges of up to 300 and 3000 Amps. Both the data logger housing and the current sensors are water resistant and rated to IP 67. A selection of data storage modes, as well as data sampling rates, is user programmable through the DataView^® software included with the unit. However, most of the setup can also be done from the keypad and LCD display on the instrument. The measurements are stored in internal nonvolatile memory. Data storage rates as fast as once per second.

Communication is done through a USB port or wireless Wi-Fi and it is powered by two rechargeable NiMH batteries. The instrument can also be externally powered through the USB plug.

Includes small classic tool bag, 10 ft USB Type A to Type B cable, (4) stainless steel mounting brackets with (4) Phillips M4-0.7 x 8 mm stainless steel machine screws, USB power adapter, quick start guide, and USB thumb drive with DataView® software and user manual.

Applications

• Single/Split-phase and 3- or 4-phase load monitoring
• Neutral and ground current monitoring
• Intermittent problem detection
• Machine load monitoring
• Fault current detection
• Load profiling

The DL914 is also available with an added channel for neutral current monitoring

The post AEMC DL913 appeared first on CAS Dataloggers.

The RTR-507B connects to our temperature and high precision humidity sensor enabling it to measure and record temperatures from -25 to 70℃ and humidity from 0 to 99% RH with superior accuracy.

The brand new RTR-500B series allows you to mix and match an array of wireless radio communication loggers with various Base Units or Data Collectors to meet your needs. Logged data can be automatically sent via network or mobile communication to be saved in cloud storage or to a specified location.

RTR-507B data loggers have a wireless radio communication range with compatible base units of up to 150m (500ft).

Data can be transmitted from a logger to a base unit and then automatically uploaded to cloud storage or saved to a specified location. Data can also be checked on your PC screen or on-site with one of our compatible data collectors.

It is perfect for situations where strict temperature and humidity control is required, such as when storing delicate items or when testing in temperature-humidity controlled chambers.

Looking for the RTR-507? The RTR-500 Series has been effectively discontinued, however, existing RTR-500 Series hardware will work with the new RTR-500B Series.

Introduction to the RTR-500B Series

The post TandD RTR-507B appeared first on CAS Dataloggers.

The all-in-one sensor for RTR-503B has a temperature measurement range of 0-55℃ and a humidity measurement range from 10 to 95％RH.

The brand new RTR-500B series allows you to mix and match an array of wireless radio communication loggers with various Base Units or Data Collectors to meet your needs. Logged data can be automatically sent via network or mobile communication to be saved in cloud storage or to a specified location.

RTR-503B data loggers have a wireless radio communication range with compatible base units of up to 150m (500ft).

Data can be transmitted from a logger to a base unit and then automatically uploaded to cloud storage or saved to a specified location. Data can also be checked on your PC screen or on-site with one of our compatible data collectors.

The RTR-503B with its wireless radio communication capabilities is perfect for applications where temperature and humidity at various measurement points are managed at once, such as in temperature-controlled storage facilities and warehouses.

Looking for the RTR-503? The RTR-500 Series has been effectively discontinued, however, existing RTR-500 Series hardware will work with the new RTR-500B Series.

Introduction to the RTR-500B Series

The post TandD RTR-503B appeared first on CAS Dataloggers.

The RTR-502B is a temperature data logger with an external sensor and quick response to changes in temperature. It has a large selection of optional sensors with a wide measurement range (-60℃ to +155℃), which provides extra versatility to match your situation. It also has a waterproof rating of IP64 (splash-proof).

The brand new RTR-500B series allows you to mix and match an array of wireless radio communication loggers with various Base Units or Data Collectors to meet your needs. Logged data can be automatically sent via network or mobile communication to be saved in cloud storage or to a specified location.

RTR-502B data loggers have a wireless radio communication range with compatible base units of up to 150m (500ft).

Data can be transmitted from a logger to a base unit and then automatically uploaded to cloud storage or saved to a specified location. Data can also be checked on your PC screen or on-site with one of our compatible data collectors.

The RTR-502B is comparatively quick to follow changes in temperature and can be used with a wide variety of sensors, making it suitable for use in logging product temperature of both liquids and solids. It is also well suited for measuring ambient temperatures inside refrigeration and freezer units.

Looking for the RTR-502? The RTR-500 Series has been effectively discontinued, however, existing RTR-500 Series hardware will work with the new RTR-500B Series.

Introduction to the RTR-502B Series

The post TandD RTR-502B appeared first on CAS Dataloggers.

The RTR-501B with its compact rugged design and internal temperature sensor can be used in environments of -40℃ to +80℃ and has an IP67 waterproof rating (immersion proof). The slower response to temperature changes makes it perfect for temperature monitoring of products stored in the refrigerator.

The brand new RTR-500B series allows you to mix and match an array of wireless radio communication loggers with various Base Units or Data Collectors to meet your needs. Logged data can be automatically sent via network or mobile communication to be saved in cloud storage or to a specified location.

RTR-501B data loggers have a wireless radio communication range with compatible base units of up to 150m (500ft).

Data can be transmitted from a logger to a base unit and then automatically uploaded to cloud storage or saved to a specified location. Data can also be checked on your PC screen or on-site with one of our compatible data collectors.

Its strong and compact design makes it perfect for temperature management during transportation of not only food items, but also, pharmaceuticals and precision equipment.

Looking for the RTR-501? The RTR-500 Series has been effectively discontinued, however, existing RTR-500 Series hardware will work with the new RTR-500B Series.

Introduction to the RTR-500B Series

The post TandD RTR-501B appeared first on CAS Dataloggers.

The Expert Logger 400 is Delphin‘s new generation of data loggers. It combines the latest communication technology with advanced measurement technology and is based on FPGA technology to make it especially powerful. It can process up to 16 analog input channels at both low and high rates of sampling. Measurement data can be accurately acquired, independently stored and transmitted to the internet or a PC for evaluation via USB, LAN, WLAN or LTE.

Operation Made Simple

Sensors are connected via plug-in screw terminals and a chart clearly shows how channels are arranged. Users always have a good overview of the channels despite their high density. Each set of four terminals can be configured as two differential inputs to measure voltage, currents, thermocouples, or to take measurements from a 4-wire RTD.

Configuration – Fast and Easy

The Expert Logger 400 is simple to configure from a PC. These settings remain stored within the Expert Logger even when disconnected from the power supply. The device settings can also be read out and stored on a PC and analyzed offline without the need for a connected Expert Logger. The offline configuration settings are then simply read into the device when connected. The software used for configuration is simple to operate to let users fully focus on their measurement tasks.

Intelligent Signal Processing

Signal processing using internal software channels significantly simplifies measurement tasks. Flexible calculation channels enable measurement data to undergo further computation and recording. Integrators directly calculate volumes or quantities from time-related measurement data such as mass and discharge flow rates. Limit values can monitor measurement data and be used to switch digital outputs or automatically send emails. Complex signal processing is possible using pulse counters, stop-clock functions, and operating-hours counter. Averages can be calculated and recorded as time-weighted or moving. The Expert Logger‘s software channels clearly set it apart from other loggers and make it very popular among users.

Applications

• Data logging
• Environmental measurement technology
• Product testing
• Measurement data diagnosis
• Lab data acquisition
• Trials and tests
• Energy optimization

The post Delphin Expert Logger 400 appeared first on CAS Dataloggers.

The Expert Logger 300 is Delphin‘s new generation of data loggers. It combines the latest communication technology with advanced measurement technology, and is based on FPGA technology to make it especially powerful. It can process up to 46 analog input channels at both low and high rates of sampling. Measurement data can be accurately acquired, independently stored and transmitted to the internet or a PC for evaluation via USB, LAN, WLAN or LTE.

Operation made simple

Sensors are connected via plug-in screw terminals and a chart clearly shows how channels are arranged. Users always have a good overview of the channels despite their high density. Each set of four terminals can be configured as two differential inputs to measure voltage, currents, thermocouples, or to take measurements from a 4-wire RTD.

Configuration – Fast and Easy

The Expert Logger 300 is simple to configure from a PC. These settings remain stored within the Expert Logger even when disconnected from the power supply. The device settings can also be read out and stored on a PC and analysed offline without the need for a connected Expert Logger. The offline configuration settings are then simply read into the device when connected. The software used for configuration is simple to operate to let users fully focus on their measurement tasks.

Intelligent Signal Processing

Signal processing using internal software channels significantly simplifies measurement tasks. Flexible calculation channels enable measurement data to undergo further computation and recording. Integrators directly calculate volumes or quantities from time related measurement data such as mass and discharge flow rates. Limit values can monitor measurement data and be used to switch digital outputs or automatically send emails. Complex signal processing is possible using pulse counters, stop-clock functions and operating-hours counter. Averages can be calculated and recorded as time-weighted or moving. The Expert Logger‘s software channels clearly set it apart from other loggers and make it very popular among users.

Applications

• Data logging
• Environmental measurement technology
• Product testing
• Measurement data diagnosis
• Lab data acquisition
• Trials and tests
• Energy optimization

The post Delphin Expert Logger 300 appeared first on CAS Dataloggers.