Applications
• Energy audits
• Electrical diagnostics
• Industrial maintenance
• Simple, effective ergonomics
In its site-proof case with the mounting kit, it can be installed very easily at the top of an electricity pole. The large backlit display is easy to read in all circumstances. It is equipped with 1 voltage inputs and 4 current inputs.

RMS and DC measurements
• AC and/or DC voltages up to 1,000 V
• currents up to 10 kA AC or 5 kA DC (depending on the current sensor).
• active, reactive and apparent power values
• active, reactive and apparent energy values
• fundamental and balanced active power values and unbalanced active power values
• measurements and characterization on motors (via Android application)
• breakdown of energy losses
• phase information: cos φ, tan Φ, power factor (PF)
• crest factor
• THD calculation for currents and voltages
• DC, 50 Hz, 60 Hz and 400 Hz (Naval, etc.) measurements

PEL Transfer software
With the PEL Transfer software you can:
• set up your PEL
• check the connections before recording begins
• download the measurements recorded in the PEL
• view the results of the various measurements and analyses
Additional advantage: PEL Transfer converts your electricity consumption into the local currency (€, £, $, etc. – 8 tariff ranges).

Communication and networks
The PEL 110 models offer multiple communication modes:
– USB , the simplest link when not working remotely
– Ethernet RJ45 or Wi-fi (server): connect your PEL11x to the server to communicate from any workstation in the network equipped with the PEL Transfer software
– Wi-fi (Access Point):
• Create a direct link between the PEL11x and your computer
• The Access Point (AP) mode supports up to 5 clients

A PEL 115 IS DELIVERED WITH 1 bag for the accessories, 5 x IP67 voltage cables, 5 lockable crocodile clips, 1 set of inserts/rings, 1 SD card, 1 SD Card-USB adapter, 1 USB cable, PEL TRANSFER PC software & User’s Manual downloadable from our website, 1 Quick Start Guide.

The post AEMC PEL 115 appeared first on CAS Dataloggers.

Applications
• Energy audits
• Electrical diagnostics
• Industrial maintenance

Simple, Effective Ergonomics
• compact and magnetized
• 3 voltage inputs and 3 current inputs
• ideal for use in cold rooms (-20 °C)
• self-powered via the phase (option)

RMS and DC Measurements
• AC and/or DC voltages up to 1,000 V
• currents up to 10 kA AC or 5 kA DC (depending on the current sensor).
• active, reactive and apparent power values
• active, reactive and apparent energy values
• fundamental and balanced active power values and unbalanced active power values
• measurements and characterization on motors (via Android application)

Functions
• breakdown of energy losses
• phase information: cos φ, tan Φ, power factor (PF)
• crest factor
• THD calculation for currents and voltages
• DC, 50 Hz, 60 Hz and 400 Hz (Naval, etc.) measurements

PEL Transfer software
With the PEL Transfer software you can:
• set up your PEL
• check the connections before recording begins
• download the measurements recorded in the PEL
• view the results of the various measurements and analyses
Additional advantage: PEL Transfer converts your electricity consumption into the local currency (€, £, $, etc. – 8 tariff ranges).

Communication and Networks
The PEL 110 models offer multiple communication modes:
– USB , the simplest link when not working remotely
– Ethernet RJ45 or Wifi (server): connect your PEL11x to the server to communicate from any workstation in the network equipped with the PEL Transfer software
– Wifi (Access Point):
• Create a direct link between the PEL11x and your computer
• The Access Point (AP) mode supports up to 5 clients

A PEL 112 IS DELIVERED WITH: 1 carrying bag, 4 voltage cables, 4 crocodile clips, 1 set of inserts/ rings, 1 SD card, 1 SD Card-USB adapter, 1 USB cable, PEL TRANSFER PC software & User’s Manual downloadable from our website, 1 Quick Start Guide.

The post AEMC PEL 112 appeared first on CAS Dataloggers.

Communication and networks
The PEL 110 models offer multiple communication modes:
– USB, the simplest link when not working remotely
– Ethernet RJ45 or Wi-fi (server): connect your PEL11x to the server to communicate from any workstation in the network equipped with the PEL Transfer software
– Wi-fi (Access Point):
• Create a direct link between the PEL11x and your computer
• The Access Point (AP) mode supports up to 5 clients

A PEL 113 IS DELIVERED WITH: 1 carrying bag, 4 voltage cables, 4 crocodile clips, 1 set of inserts/ rings, 1 SD card, 1 SD Card-USB adapter, 1 USB cable, PEL TRANSFER PC software & User’s Manual downloadable from our website, 1 Quick Start Guide.

The post AEMC PEL 113 appeared first on CAS Dataloggers.

The PEL 52 represents an affordable and user-friendly power and energy data logger, suitable for both single and split-phase applications. It is specifically designed for electricians, engineers, and contractors working in residential and light commercial areas. This device allows effortless measurement, recording, and analysis of crucial energy data. Generating reports is a breeze, requiring minimal configuration time and effort, with the added benefit of having standard and customizable report options available.

The instrument is powered by V1 inputs from (90 to 690) V. Two 800 mAh NIMH batteries supply power if a source is not available.

The instrument’s design enables it to be installed inside a load center panel (including the current sensors) allowing the door to close on most panels. The PEL 52 series energy loggers measure and record one or two True RMS voltage inputs up to 690 V and current inputs up to 3600 A (sensor dependent), Watts, VARS, VA, and Energy (kWh and kVA). Power Factor (PF), Displacement Power Factor (DPF), and Frequency are calculated and recorded as well. All variables are recorded and stored at a one-second interval and on user-selectable demand intervals from 1 to 60 minutes.

By combining energy-saving techniques with detailed power consumption monitoring, residential and commercial builders can gain valuable insights into their energy usage, pinpoint areas for improvement, and monitor their advancements in energy conservation efforts. Ultimately, this results in decreased energy expenses, a diminished environmental footprint, and improved operational efficiency.

Key Features

• Accurate and reliable: Provides precise readings over time to make accurate assessments of energy consumption
• Real-time monitoring to identify patterns, monitor changes, and make informed decisions to optimize energy usage
• Works with a wide range of electrical equipment, systems and residential and light commercial single or split phase measurements
• Capable of performing load studies in compliance with NEC 220.87
• Log data over an extended period, to analyze historical trends and identify areas for improvement
• DataView software included for data analysis and report generation
• Rugged and durable: withstands the demands of real-world applications
• Wi-Fi communication and remote viewing with integrated web server (AndroidTM, iOS, Windows, etc.)
• Compact casing with built-in magnets for mounting easily inside electrical cabinets

Applications

• Load surveys – Find out how much energy each item of equipment consumes operating at its min/max power level.
• Energy analysis – Estimate energy consumption before and after the improvements.
• Energy surveys – The measurements for energy surveys must be performed at several locations on the evaluation site.

The post AEMC PEL 52 appeared first on CAS Dataloggers.

The AEMC DL913 AC Current Data Logger is a 3-channel AC current data logger with three integral flexible current sensors. Each sensor is 24 inches long and capable of wrapping around a 7.64-inch conductor. The DL913 has two measurement ranges of up to 300 and 3000 Amps. Both the data logger housing and the current sensors are water resistant and rated to IP 67. A selection of data storage modes, as well as data sampling rates, is user programmable through the DataView^® software included with the unit. However, most of the setup can also be done from the keypad and LCD display on the instrument. The measurements are stored in internal nonvolatile memory. Data storage rates as fast as once per second.

Communication is done through a USB port or wireless Wi-Fi and it is powered by two rechargeable NiMH batteries. The instrument can also be externally powered through the USB plug.

Includes small classic tool bag, 10 ft USB Type A to Type B cable, (4) stainless steel mounting brackets with (4) Phillips M4-0.7 x 8 mm stainless steel machine screws, USB power adapter, quick start guide, and USB thumb drive with DataView® software and user manual.

Applications

• Single/Split-phase and 3- or 4-phase load monitoring
• Neutral and ground current monitoring
• Intermittent problem detection
• Machine load monitoring
• Fault current detection
• Load profiling

The DL914 is also available with an added channel for neutral current monitoring

The post AEMC DL913 appeared first on CAS Dataloggers.

The AEMC DL914 AC Current Data Logger is a 4-channel AC current data logger with four integral flexible current sensors. Each sensor is 24 inches long and capable of wrapping around a 7.64-inch conductor. The DL914 has two measurement ranges of up to 300 and 3000 Amps. Both the data logger housing and the current sensors are water resistant and rated to IP 67. A selection of data storage modes, as well as data sampling rates, is user programmable through the DataView^® software included with the unit. However, most of the setup can also be done from the keypad and LCD display on the instrument. The measurements are stored in internal nonvolatile memory. Data storage rates as fast as once per second.

Communication is done through a USB port or wireless Wi-Fi and it is powered by two rechargeable NiMH batteries. The instrument can also be externally powered through the USB plug.

Includes small classic tool bag, 10 ft USB Type A to Type B cable, (4) stainless steel mounting brackets with (4) Phillips M4-0.7 x 8 mm stainless steel machine screws, USB power adapter, quick start guide, and USB thumb drive with DataView® software and user manual.

Applications:

• Single/Split-phase and 3- or 4-phase load monitoring
• Neutral and ground current monitoring
• Intermittent problem detection
• Machine load monitoring
• Fault current detection
• Load profiling

The DL913 is also available if you only require 3 channels

The post AEMC DL914 appeared first on CAS Dataloggers.

The main advantage of the logger is its ability to begin recording with only the need to configure the length of time for the recording. A simple one-button operation is all you need. The front panel LED alerts the operator of the logger’s status.

SL40 Features:

• Simple 1 button operation
• Quick 2-wire input connection
• User-configurable scaling, units of measure, and recording length
• Stores up to 4 million measurements
• Data analysis software included
• Software provides real-time trend graph display, data download, analysis, and report generation
• Micro-B USB cable included

View the rest of the SL Series here.

The post AEMC SL40 appeared first on CAS Dataloggers.

The main advantage of the logger is its ability to begin recording with only the need to configure the length of time for the recording. A simple one-button operation is all you need. The front panel LED alerts the operator of the logger’s status.

SL20 Features:

• Simple 1 button operation
• Quick 2-wire input connection
• User-configurable scaling, units of measure, and recording length
• Stores up to 4 million measurements
• Data analysis software included
• Software provides real-time trend graph display, data download, analysis, and report generation
• Micro-B USB cable included

View the rest of the SL Series here.

The post AEMC SL20 appeared first on CAS Dataloggers.

The main advantage of the logger is its ability to begin recording with only the need to configure the length of time for the recording. A simple one-button operation is all you need. The front panel LED alerts the operator of the logger’s status.

SL13 Features:

• Simple 1 button operation
• Quick 2-wire input connection
• User-configurable scaling, units of measure, and recording length
• Stores up to 4 million measurements
• Data analysis software included
• Software provides real-time trend graph display, data download, analysis, and report generation
• Micro-B USB cable included

View the rest of the SL Series here.

The post AEMC SL13 appeared first on CAS Dataloggers.

The main advantage of the logger is its ability to begin recording with only the need to configure the length of time for the recording. A simple one-button operation is all you need. The front panel LED alerts the operator of the logger’s status.

SL12 Features:

• Simple 1 button operation
• Quick 2-wire input connection
• User-configurable scaling, units of measure, and recording length
• Stores up to 4 million measurements
• Data analysis software included
• Software provides real-time trend graph display, data download, analysis, and report generation
• Micro-B USB cable included

View the rest of the SL Series here.

The post AEMC SL12 appeared first on CAS Dataloggers.