Influx Data Loggers from Influx Technology - CAS DataLoggers

Influx K-PT

Liz Zala — Thu, 29 May 2025 19:19:56 +0000

Influx K-PT PT100/1000 Measurement Module

Influx’s K-PT module is designed to connect PT100/1000 sensors to a K-Box or K-AN8 voltage measurement device that normally cannot support these sensors. The powered K-PT module simply enables PT100/1000 sensors to be connected via the D-Sub 9 terminals and will output the signal voltages to an Analog measurement device.

Calibration and sampling rates can be configured using the freely distributed K-Cal software.

The Pt100/1000 is one of the most accurate temperature sensors. Not only does it provide good accuracy, it also provides excellent stability and repeatability. Pt100/Pt1000 are also relatively immune to electrical noise, and therefore, well suited for temperature measurement in industrial environments, especially around motors, generators and other high voltage equipment. Using the K-PT add-on module, it is possible to connect and accurately measure Pt100 and Pt1000 sensors.

Key Features

Influx K-PT Connects up to 4 RTD sensors to the K-Series K-Box/KAN8 via the Analog inputs
Simple signal configuration using a DBC file
Supplied with configuration software Influx K-Cal for Windows®
Refresh rates achievable (4 channels 20Hz)
ABS enclosure

Advantages

Accuracy, excellent stability and repeatability
Relatively immune to electric noise
Well suited and widely used for temperature measurements in industrial environments. Especially around motors, generators and other high voltage equipment
Easily configurable software

The post Influx K-PT appeared first on CAS Dataloggers.

Influx K-Bob

Liz Zala — Thu, 29 May 2025 19:19:43 +0000

Influx K-Bob Module

The K-Bob is an ideal add-on to K-Box and K-AN8 modules for easy sensor connection. This BNC breakout box for analog/digital inputs with connection cable to K-Box and K-AN8. It is an extension box from Influx that allows users to connect sensors to the analog and digital ports, with easy connection with BNC connectors.

This BNC breakout box is included in Influx’s K-Box start up kit! You can find out more here.

Key Features

8x BNC Connectors for Analog Inputs
4x BNC Connectors for Digital Inputs.
DB9 Male connector for auxiliary CAN/Power.
24V Power Output
5V Power Output

K-Bob Advantages

High mechanical reliability and durability at the expense of moving parts in the sensor
No need in other power supply for sensor
Compact structure and a large ratio of sensitivity to mass

Connector	No. of Pins	Function
Analog Connectors	8 Pins	For interfacing sensors with analogue inputs
Digital Connector	4 Pins	For interfacing sensors with digital inputs
Banana Connectors	4 Pins	For power out
DB9 CAN Connector	1 – female connector (9 pins)	For plugging another CAN devices
DB9 CAN & Digital Connector	1 – male connector (9 pins)	For interfacing with K-Box or K-AN8
ADC Connector	1 (female) (25 pins)	For interfacing with K-Box or K-AN8

The post Influx K-Bob appeared first on CAS Dataloggers.

Influx K-Volt

Liz Zala — Thu, 29 May 2025 19:19:27 +0000

Influx K-Volt Stackable & Configurable Signal Generator

The Influx K-Volt can be used to generate fast configurable analog and digital signals from CAN Bus messages. Designed for high speed and accurate simulation of sensors (For example: HIL and Replay systems). The K-Volt can be connected directly to a PC via a USB connection.

The output calibration and set-up of the K-Volt is easily configurable via the Influx K-Cal software, a freely distributable Windows PC application. The K-Volt can be integrated into your Windows applications via the SDK K_VoltLIB, providing everything you need to develop your own applications.

The K-Volt is part of Influx Technology’s stackable instrumentation K-Series which is compatible with Influx Rebel data loggers

Key Features

Software configurable output operating modes: Voltage, Current, Frequency, PWM and digital
Configuration, programming and output control via CAN or USB interface
PWM signal can be configured to simulate engine crank and CAM patterns
Supplied with configuration software Influx K-Cal for Windows®
Device drivers for user defined Windows® USB applications. (32/64-bit)
Suitable for use in the automotive field
Power by USB only to enable configuration and programming
Eight LEDs indicate the functions of the corresponding outputs
LEDs indicate the connectivity of the device and the operating mode
Ability to exclude the power on unused outputs thus reducing power consumption
Galvanic isolation. (Outputs, USB, supply and CAN Bus)
WakeOnCAN enables K-Volt to power up and power down in deep sleep mode
Stackable ABS enclosure

The post Influx K-Volt appeared first on CAS Dataloggers.

Influx K-IEPE

Liz Zala — Wed, 21 May 2025 21:41:49 +0000

Influx K-IEPE Module

The module is designed to connect Influx IEPE sensors to a K-Box or K-AN8 voltage measurement device that normally cannot support IEPE sensors.

The K-IEPE powered module simply enables IEPE sensors to be connected via the BNC terminals and will output the signal voltages to Analogue measurement device.

Calibration and sampling rates can be configured using the freely distributed K-Cal software.

Key Features

Influx K-IEPE Connects to the K-Series K-Box/K-AN8 via the Analogue inputs
Refresh rates achievable (4 channels 1kHz)
ABS enclosure

Advantages

Wide frequency range
Linear amplitude characteristics in wide dynamic range
Ability to operate in severe ambient conditions (temperature, humidity, radiation and magnetic fields)
High mechanical reliability and durability at expense of moving parts in the sensor
High vibration and shock resistance
No need of other power supply for sensors
Compact structure and a large ratio of sensitivity to mass

The post Influx K-IEPE appeared first on CAS Dataloggers.

Influx K-AN8

Liz Zala — Wed, 21 May 2025 21:41:27 +0000

Influx K-AN8 Analog Module

The Influx K-AN8 Module offers combined Voltages, Current and PWM Signals Accurate analogue and digital sensor measurement data for CAN applications.

A stackable, easy to use and cost-effective solution to measuring Analog and digital/P.W.M. sensors together in one module.

The K-AN8 includes Influx’s unique power down and WakeOnCAN feature for quick installation on long term unattended fleet test vehicles.

Accurate sensor measurement data is transmitted periodically on the CAN Bus enabling multiple K-Series modules to be connected together.

The K-AN8 CAN Bus settings, calibration, and sampling rates are all configurable and stored even when not powered.

Key Features

8 analog inputs with variable input sampling rates
8 channels at 1k Hz, 4 channels at 2kHz, 2 channels at 10k Hz and 5kHz
PWM: 3 inputs frequency measurements, counters or pulse measurements
Outputs: 4 Relay outputs. (Optional)
Regulated +5V and +24V output power supply for external sensors
Supplied with configuration software, Influx K-Cal for Windows® and configurable via a DBC file
Instrumentation data time synchronized with recorded vehicle network data via CAN
Galvanic isolation between modules (enclosure, power, CAN BUS and analogue input module)
Analog channel over-voltage protection +150 Volt
Stackable ABS enclosure

Advantages

Combined Voltage, P.W.M./Digital measurements
Software switchable voltage input ranges from ±80V to ±10V
Very high accuracy- Analogue ±0.0015%
High input impedance on Analogue inputs
WakeOnCAN and power down deep sleep mode

The post Influx K-AN8 appeared first on CAS Dataloggers.

Influx Rebel CT Flexray

Liz Zala — Wed, 21 May 2025 21:40:30 +0000

Rebel CT FlexRay Compact, Configurable Data Logger

The Influx Rebel CT FlexRay compact data logger is ideal for development applications that requires up to 7 vehicle CAN 2.0 networks, FlexRay and additional LIN data.

The standard Rebel FlexRay data logger includes an internal 18Hz GNSS module and a 3D accelerometer.

The Rebel CT FlexRay can optionally be upgraded to include GNSS, 3D accelerometer, 3D Gyro, Wi-Fi and 4G LTE.

Key Features:

7x CAN 2.0 buses
3x LIN buses
2x FlexRay channels
3x digital I/O channels
4x analog input channels (Each channel can be calibrated independently)
18Hz GNSS with 1 KHz xyz Accelerometer
Protocols CCP, xCPOnCAN and xCPOnFlexRay, UDS (ISO14229), J1939
SDXC card data storage (Maximum capacity 128GB)
Galvanic isolation (USB, enclosure)
IP65 dust and splash proof cover – SD card securely housed behind a flip panel
Low power consumption in sleep mode and WakeOnCAN or WakeOnSignal feature

View our other Rebel CT Series products here.

The post Influx Rebel CT Flexray appeared first on CAS Dataloggers.

Influx Rebel CT CAN FD

Liz Zala — Wed, 21 May 2025 21:40:11 +0000

Rebel CT CAN FD Compact, Configurable CAN, LIN and CAN FD Data Logger

The Influx Rebel CT CAN FD is a compact data logger with gateway functionality and is an ideal choice for applications that requires vehicle CAN 2.0, CAN FD, and LIN network data.

The data logger can optionally be upgraded to include GNSS, 3D accelerometer, 3D Gyro, Wi-Fi, and 4G LTE CAT 1.

Key Features:

2x CAN 2.0 buses and 2x CAN FD buses
2x LIN buses
3x digital I/O channels
4x analog input channels (Each channel can be calibrated independently)
Supports protocols CCP, xCPOnCAN, UDS (ISO14229), J1939
SDXC card data storage. (Maximum capacity 128GB)
Galvanic isolation (USB, enclosure)
IP65 dust and splash proof cover – SD card securely housed behind a flip panel
Low power consumption in sleep mode and WakeOnCAN or WakeOnSignal feature

Optional upgrades:

Internal GNSS module (Up to 18Hz refresh rate, socket for external antenna)
Internal 3D 1kHz accelerometer and 3D Gyro module
Internal 4G LTE module
Internal Wi-Fi module
Larger capacity data storage SDXC cards available. (Up to 128GByte)
DiaLog Standard is required for data analysis/live data
DiaLog Plus is required for xCP/CCP or to connect to StreamLog
DiaLog Gateway for configuring CAN 2.0 gateway functions
Extension cable to connect CAN 0/PWR to vehicle OBD Port (9 Way D Sub to OBD)
Rebel Dash display for real-time CAN messages and signals display

The post Influx Rebel CT CAN FD appeared first on CAS Dataloggers.

Influx K-Box

Liz Zala — Wed, 21 May 2025 21:38:07 +0000

Influx K-Box Multi-DAQ Module

Designed for accurate sensor measurement, with captured data being transmitted on the CAN Bus. The Multi-DAQ K-Box is ideal for applications that require a quick set-up and collection of thermocouples, analog, digital and PWM inputs.

Stackable with all of our K-series instrumentation modules, the K-Box includes our unique power down and WakeOnCAN feature, enabling quick installation on long term unattended fleet test vehicles.

Accurate sensor measurement data is transmitted periodically on the CAN Bus enabling multiple K-Series modules to be connected together and data recorded via our CAN data loggers.

The K-Box CAN Bus settings, calibration and sampling rates are all easily configurable and stored even when not powered.

Key Features:

Up to 8 K-type connections at up to 20 Hz sampling rate
Software switchable voltage input ranges from +/-80V to +/-10V
8 Analog inputs with variable input sampling rates (8 channels at 1k Hz, 4 channels at 5k Hz)
PWM: 3 inputs frequency measurements, counters or pulse measurements
Outputs: 4 Relay outputs (Optional)
Regulated +5V and +24V output power supply for external sensors
Supplied with configuration software, Influx K-Cal for Windows® and configurable via a DBC file
Instrumentation data time synchronized with recorded vehicle network data via CAN
Galvanic isolation between modules (enclosure, power, CAN BUS, analog input module and thermocouple input module)
Measurement accuracy: +/- 1 degree C, Measurement resolution: 0.1 degree C
Analog channel over-voltage protection +/- 150 Volt
Stackable ABS enclosure
Supports PT100/1000 sensors via K-PT addon
Supports IEPE sensors via K-IEPE addon
Supports analog and digital BNC sensors via K-Bob add-on

Advantages

Combined Voltage, Thermocouple and P.W.M./Digital measurements
Cold junction compensation for accurate thermocouple measurement
High input impedance on Analogue inputs
WakeOnCAN and power down deep sleep mode

The post Influx K-Box appeared first on CAS Dataloggers.

Influx ReXgen 1

Liz Zala — Wed, 21 May 2025 20:05:15 +0000

The ReXgen 1 is a compact, accurate, cost effective, single CAN datalogger with pass-thru. Suitable for automotive and various industrial applications.

Supports J2534 (Pass-thru).
Logs data reliably, for hours, from a CAN bus.
Saves your data to the embedded eMMC.
IP65 enclosure
Easily mounted and integrated with your vehicle /machine.

The ReXgen 1 is designed to be fitted during development through to production, capturing continuous data and events.

Key features

Supports 1XCAN bus.
Functions as an interface device and supports J2534 (Pass-thru)
Supports live CAN trace monitoring RAW CAN signals, SAE J1939
Sleep modes with wake-up on CAN and low power consumption
Encrypts data logs using Advanced Encryption Standard (AES)
Enables locking of the device using RSA data security
Open Libraries for logger management and data Conversion
XML based configuration (Schema provided)
Free ReXdesk software that allows the user to export the loaded data to .mf4, .csv, mat, .asc, .blf, .trc and. rxd format
Supports free firmware updates for adding features
Tolerable to harsh environments with an IP65 rating
Free powerful graphic interface application tool ReXdesk provided
Micro USB 2.0 PC interface
CAN error logging

ReXgen 1’s additional features:

Efficiently records CAN bus data and advanced message f iltering on configurable channels (J1939 and CAN)
Supports advanced triggering options and advanced CAN bit timing configuration.
The most compact, cost-effective, plug-and-play device which operates as a CAN bus interface for real-time USB streaming and has 8GB eMMc storage.

The post Influx ReXgen 1 appeared first on CAS Dataloggers.

Influx REXGEN Pro

Liz Zala — Tue, 08 Apr 2025 15:14:19 +0000

REXGEN Pro is Influx Technology’s most advanced data logger yet, designed for unmatched security, reliability, and real-time performance. Built on a multi-layer architecture, it ensures precision logging without data loss, enabling edge computing and CAN to cloud integration. REXGEN Pro allows you to access your invaluable insights remotely without the need for physical connections.

Supporting UDS and XCP, it enables real-time diagnostics, flash programming, and high-speed data acquisition-making it ideal for ECU development, vehicle testing, and fleet monitoring. Designed for any environment, REXGEN Pro’s rugged, compact IP65-rated build and generous onboard storage ensure you can capture and manage critical data with confidence-wherever your work takes you.

Seamless Connectivity – Live Data. Zero Manual Handling

With built-in connectivity, REXGEN Pro automatically delivers data to your cloud or enterprise platform – wherever your assets are located.

Built for Enterprise – One Platform. Unlimited Applications

From predictive maintenance in mining to remote diagnostics across worldwide fleets — the logger handles complexity at scale. With a rugged build and modular design, it’s ready for anything.

- Scalable synchronization allowing multi-unit setups
- 4 x CAN/CAN FD Interfaces
- Support for UDS, XCP, J1939, OBD, and LIN
- 32GB onboard storage & quad-core processing

Unlock Real-Time Insight

REXGEN Pro gives you full visibility into vehicle performance, diagnostics and asset health — from anywhere, at any time. Seamlessly integrate it into your existing systems and start making smarter, faster decisions.

Rugged. Resilient. Reliable

With industrial-grade durability, REXGEN Pro is made for the frontline — whether that’s under the chassis, in a cab, or deep underground.

The post Influx REXGEN Pro appeared first on CAS Dataloggers.